ZTE Portable 4G LTE Wi-Fi Router (MF935N) - Stay Connected on the Go
IN STOCK at EXTERNAL supplier
Price
R689
•Wi-Fi: 802.11b/g/n, 2.4GHz, support Up to 8 simultaneous users
•4G LTE Band FDD-LTE band B1/3/7/8/20/28,TDD-LTE band B38/40/41
•3G UMTS Band B1/8
•4G LTE peak speed: DL 150Mb/s, UL 50Mb/s
•3G HSUPA: DL 21Mb/s,UL5.76Mb/s
•Interface: 4FF Sim slot-Nano Sim, Micro USB
•Buttons: Power, WPS, Reset
•LED indicator: Network Status, WiFi Status, Battery Status
•Battery capacity: 2000mAh, working in 4G(LTE) mode to 7 hours.
•Software: Wifi security, DHCP, Port forwarding, IP fliter, DMZ, UPnP, WIFI Control, WPS,SMS,USSD
•Dimensions: 100x60x16mm
•Operation System: Windows XP, Windows Vista, Windows 7, Windows 8/10/11, MAC
ZTE MF79U 3G / 4G 2 in 1 (Modem + WiFi) Router
IN STOCK at GeeWiz
Price
R595
- 4G FDD-LTE Network Frequency: 2100 MHz
- 2G GSM/EDGE/GPRS: 850/900/1800/1900MHz
- LTE Download speed to 150Mbps and Upload speed to 50mbps
- Support up to 10 users to access internet
- Wi-Fi 802.11 a/b/g/n
- 2 X 2 MIMO, WiFi 2.4G/5G, WiFi offload
- Compatible with Windows, Mac OS
ZTE Wi-Fi 6 Router - 3000Mbps / White
IN STOCK at EXTERNAL supplier
Price
R941
- 3000Mbps,
- Wi-Fi 6 Router,
- Integrated Antennas
- 1X 1Gig WAN, 3X 1Gig LAN, Mesh
Sunix SER5027A RS-232 Serial 1-port PCI Card
IN STOCK at EXTERNAL supplier
Price
R290
- Expands single independent RS-232 serial port with communication speeds up to 115.2Kbps.
- High reliability SUN1989 16C950 compatible UART controller on-board.
- Compliance with PCI 33MHz Ver. 3.0/2.3/2.2./2.1 specification.
- Supports both 64-bit & 32-bit PCI bus slot and 3.3V & 5V power.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ± 2KV ESD protection for all serial signals.
- Plug-n-Play, I/O address and IRQ assigned by BIOS.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS.
ZTE USB LTE Dongle
IN STOCK at EXTERNAL supplier
Price
R689
• LTE Category 4 Stick
• Wifi 802.11 b/g/n, 2.4GHz, 150Mbps, 10 users supported
• Technology LTE-FDD/UMTS/GSM
• LTE Band B1/B3/B5/B7/B8/B20 800/850/900/1800/2100/2600MHZ
• UMTS 2100/900Mhz
• LTE Download speed to 150Mbps/Upload speed to 50Mbps
• 3G UMTS Download speed to 43.2Mbps/Upload speed to 5.76Mbps
• External antenna slot: two TS-9
• Sim card: nano sim card
• Memory card expansion: MicroSD up to 32 GB
• Dimensions: 101.6x31.7x14mm
• Supported operating systems: WindowsXP, Vista, Windows 7/8, MAC, Linux
Sunix 5037PH Universal PCI Serial Board - with Power Output / 2 Port / RS-232 / High...
IN STOCK at GeeWiz
Price
R459
- Expands 2 independent RS-232 serial ports with communication speeds up to 921.6Kbps
- High-speed SUN1989 16C950 compatible UART controller on-board
- Compliance with PCI 33MHz Ver. 3.0/2.3/2.2./2.1 specification
- Supports both 64-bit & 32-bit PCI bus slots and 3.3V & 5V power
- Provides RS-232 serial ports with +5 or +12 VDC power output via COM 1st or 9th pin
- On-chip hardware auto flow control to guarantee no data loss
- Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard
- Plug-n-Play, I/O address, and IRQ assigned by BIOS
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval
- Support Microsoft Windows, Linux, and DOS
Vantec 5-Port USB 3.2 Gen2x2 (20Gbps) With 2C and 3A PCIe Host Card
IN STOCK at EXTERNAL supplier
Price
R1,092
- Support UASP Devices on both ports for extra boost in speed when using latest OS.
- Support PCI-Express 3.0 specifications for increase speed thru the PCIe Bus.
- Support for Windows and Linux OS for latest Technology
- USB 3.1 Type C Port for Newer devices and Type A for Compatibility with older USB 3.0 and 2.0.
- Full height PCIe x2 (requires x4 slot)
- Backward compatible with legacy USB 3.0, 2.0 and 1.1
- Compliant with extensible Host Controller interface specification Revision 1.1
- Support Control, Bulk, Stream, Interrupt, Isochronous transfer type
- Supports PCI Express Card Electromechanical Specification Release 2.0
- Supports PCI Bus Power Management Interface Specification Release 1.2
- Support driver on Windows 7 and native drivers within Windows 8/8.1/10
- Support Linux kernel 3.13.0 & above
ZTE - 1167Mbps- Wi-Fi 5 Router
IN STOCK at EXTERNAL supplier
Price
R675
- 802.11ac,
- 1 X Gb WAN,
- 3 X GB LAN Ports, MESH
ZTE - 3000Mbps Wi-Fi 6 Router
IN STOCK at EXTERNAL supplier
Price
R913
- ZTE - 3000Mbps,
- Wi-Fi 6 Router,
- External Antenas
- 1X 1Gig WAN, 2X 1Gig LAN, Mesh
ZTE T5400 WiFi 6+ MESH Router
IN STOCK at EXTERNAL supplier
Price
R2,049
•Max. LAN Data Rate: 1900Mbps
•Standards and Protocols: Wi-Fi 802.11g, Wi-Fi 802.11b, Wi-Fi 802.11n, Wi-Fi 802.11ac, Wi-Fi 802.11a, Wi-Fi 802.11ax
•Wi-Fi Supported Frequency: 2.4G & 5G
•Wi-Fi Transmission Standard: 802.11ac
•Wired Transfer Rate: 4000Mbps
•2.4G Wi-Fi Transmission Rate: 300 Mbps
•Encryption Type: WPA2-PSK, WPA-PSK, WEP
•Application: Home
•Function: Voip, VPN, Soho / office
•LAN Ports: 1
•WAN Ports: 1
•Gross Weight: 1.45KG
•Memory: 256MB
•Wireless Protocol: Wi-Fi 6
•5G MIMO Technology: 4x4 MIMO
•IPv6: Support
•Wireless Rate: 5400MB
•Wan access port: Gigabit network port
•Applicable area: large house type (above 120 ㎡)
•LAN output port: gigabit network port
Rextron 8-Port VGA Switch: 8-In- 2-Out (VSA801)
IN STOCK at EXTERNAL supplier
Price
R2,019
- Switches 8 VGA input (video sources) to monitor
- Supports VGA resolution up to 1920 x 1440
- Applicable to VGA, SVGA, and multi-sync monitors
- Operated by Hot Key & PS/2 keyboard (or PS/2 keypad)
- Supplies two VGA outputs
- Auto-Scan detects the linked computers
- LED shows the active status of the VGA input source
Rextron 4K Multi-Input to HDMI Switch
IN STOCK at EXTERNAL supplier
Price
R5,716
- Select 1 Video Signal (Audio Embedded) from 4 Different Sources
- 2x HDMI, 1x DisplayPort or 1x VGA to HDMI
- Auto-Sensing Function Enables the System to Automatically Select the Latest Video Source
- Supports Resolutions up to UHD (3840x2160), WQXGA (2560x1600) and Full HD (1920x1080)
Rextron 2-Port 4K DisplayPort KVM Switch to HDMI2.0 and USB3.2 Gen 1 with Audio and...
IN STOCK at EXTERNAL supplier
Price
R6,364
- Allows 2 computers to share a KVM console
- HDCP 2.2 / HDCP 1.4 Compliant
- EDID management, including EDID copy / auto EDID
- Front and rear USB ports
- 2 Flexible switching control methods: Front push buttons or hotkey control
Rextron 2-Port Dual View 4K HDMI2.0 KVM Switch with USB3.2 Gen 1 and HDCP Support...
IN STOCK at EXTERNAL supplier
Price
R3,879
- Allows 2 computers to share a KVM console
- HDCP 2.2 / HDCP 1.4 Compliant
- EDID management, including EDID copy / auto EDID
- 2 Flexible switching control methods: front push buttons or hotkey control
- Manual scan / auto scan and selectable scan interval
Sunix 4-port RS-232 High Speed Low Profile PCI Express Board
IN STOCK at EXTERNAL supplier
Price
R1,732
- 4-port
- RS-232
- High Speed Low Profile PCI Express Board
Sunix 4-port RS-232 PCI Express Board
IN STOCK at EXTERNAL supplier
Price
R1,295
- Designed to meet PCI Express Base Specification Revision 2.0. Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
- Plug-n-Play, I/O address and IRQ assigned by BIOS.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS.
Sunix ECL1400 Gigabit Ethernet 1 Port ExpressCard
IN STOCK at EXTERNAL supplier
Price
R502
- Gigabit Ethernet 1 port ExpressCard
Vantec UGT-ST400 2-Port eSATA II PCI Express Host Card
IN STOCK at EXTERNAL supplier
Price
R310
- External SATA II (eSATA) Connector
- 48 bits LBA can Break Capcity-Limit to Support HDD larger than 137GB
- Supports 1-lane 2.5Gbps PCI Express
- Hot-plug capability
- Supports SATA II transfer rate of 3.0Gbps
- Fully compliant with Serial ATA 1.0 specifications
- Supports two independent Serial ATA channels
- Independent Link, Transport, and data FIFO
- Independent command fetch, scatter/gather, and command execution
- Supports Legacy Command Queuing (LCQ)
- Supports Native Command Queuing (NCQ
- Supports Non-zero offsets NCQ
- Supports Non-zero offsets NCQ
- Supports FIS-base switching with Port Multipliers
- 31 Commands and Scatter/Gather Tables per Port
- Two Pin headers on board for LED connection
Vantec ugtPC371 2-Port USB 3.1 PCIe (10Gbps) USB C & USB Type-A
IN STOCK at EXTERNAL supplier
Price
R502
- Half height PCI_E add on card with 2 port USB 3.1 interface
- ASMedia Chipset, PCI Express to USB 3.1 host controller
- Compliant to Universal Serial Bus 3.1 specification Revision 1.0
- Backward compatible to USB 3.0 and 2.0
- Compliant with extensible Host Controller interface specification Revision 1.1
- Support Control, Bulk, Stream, Interrupt, Isochronous transfer type
- PCI Express with clocking speed up to 10Gbps
- Comes with low profile bracket for Slim Design Chassis
- Supports PCI Express® Card Electromechanical Specification Release 2.0
- Supports PCI Bus Power Management Interface Specification Release 1.2
- Support Windows 7 and native drivers for Windows 8/8.1/10
- Support Linux kernel 3.13.0 & above
- Support UASP Devices on both ports for extra boost in speed when using latest OS.
- Support PCI-Express 3.0 specifications for increase speed thru the PCIe Bus
- Support PCI-Express x4 slot interface with wider lanes for speed and large amount of data.
Vantec UGT-PC370A 2-Port USB 3.1 Gen II Type-A PCI-Express Card
IN STOCK at EXTERNAL supplier
Price
R515
- SuperSpeed Plus USB 3.1 Gen II up to 10 Gbps connection to give you Maximum Speed
- Full height PCIE Gen2 x 4 add on card with 2x USB 3.1 interfaces
- Chipset ASMedia ASM1142
- PCI Express to USB 3.1 host controller
- Compliant to Universal Serial Bus 3.1 specification Revision 1.0
- Backward compatible to USB 3.0 and 2.0
- Compliant with extensible Host Controller interface specification Revision 1.1
- Support Control, Bulk, Stream, Interrupt, Isochronous transfer types
- PCI Express Gen2 x 2 with speeds up to 10Gbps
- Supports PCI Express® Card Electromechanical Specification Release 2.0
- Supports PCI Bus Power Management Interface Specification Release 1.2
- Support driver on Windows 7 and native drivers for Windows 8/8.1
Sunix SATA0014+L 1-port PCI-E Card
IN STOCK at EXTERNAL supplier
Price
R326
- Fully compliant with one-lane 2.5Gb/s PCI Express specification.
- Serial ATA Generation 2 transfer rate of 3.0 Gb/s.
- Compliant with Serial ATA 1.0a and Serial ATA II extensions toATA 1.0a specification.
- Provides one external channel for SATA II harddisk drive andenclosure connection.
- Supports SATA II NCQ (Native Command Queuing) to maximizesystem performance.
- Hot-swapping feature allows you to attach/detach SATA device withoutfirst powering your computer off.
- Works with various brands of large capacity SATA/SATA II hard disk drives.
- Low-profile design fitting for kinds of computer chassis
Sunix IDE 2 Channel PCI RAID Controller with ODD Support
IN STOCK at EXTERNAL supplier
Price
R277
- 2 Internal ATA133 PCI Card
- Data transfer rate up to 133Mbps
- Full backward support for ATA66/100 standards
- Can be used as the boot controller when a bootable hard disk drive is attached
- Up to Hard Drives of 137GB
- Supports RAID 0 / 1 / 0+1
- ROM BIOS support Boot feature
- Plug and Play
- Supports Windows O.S.
Sunix ECSA24 SATA II 2 Channels ExpressCard
IN STOCK at EXTERNAL supplier
Price
R352
- Fully compliant with ExpressCard 54mm wide module
- Support one-lane 2.5Gbps PCI Express specification
- Serial ATA generation 2 transfer rate of 3.0Gbps
- Suitable for mobile and Notebooks
- Supports hot plug for extend Serial ATA port
- Supports Windows and Linux system
Sunix ECSA14 Serial ATA II ExpressCard
IN STOCK at EXTERNAL supplier
Price
R290
- Supports PCI Express Base Specification Revision 1.0a.
- Single-lane (x1) PCI Express throughput rates up to 2.5 Gbps.
- Compliant with ExpressCard 34/54mm module specification.
- Compliant with Serial ATA II: Extensions to Serial ATA 1.0a.
- Built-in one high speed 3.0Gbps SATA II external port.
- Supports Native Command Queue (NCQ) on SATA II port.
- Supports Port Multiplier with Command-based Switching on SATA II port.
- ExpressCard hot plugging and hot swapping features.
Sunix CBSA20 E-SATA 2-port PCMCIA/Cardbus Card
IN STOCK at EXTERNAL supplier
Price
R184
- Two independent Serial ATA channels
- Data transfer rate up to 1.5 Gbps (150 Mbps)
- Compliance with Serial ATA v1.1
- Supports large capacity disk drive than 137GB
- Supports PIO and DMA modes
- Compatible with 32-bit Cardbus
- Supports Windows O.S.
Sunix USB2312C USB 3.1 Enhanced SuperSpeed+ 10G 2 ports PCI Express Host Card with...
IN STOCK at EXTERNAL supplier
Price
R740
- Host interface: PCIe,
- Output interface: USB Type-C.
- Data transfer rate (max): 10 Gbit/s.
- Power consumption (typical): 1.1 W,
- Output voltage: 5 V,
- Output current: 1.5 A.
- Windows operating systems supported: Windows 10,Windows 7,Windows 8,
- Linux operating systems supported: Kernel 4.6.4
Sunix ipc-E3204S Industrial 4-port RS-232/422/485 with Surge PCI-Express Serial Card
IN STOCK at EXTERNAL supplier
Price
R3,239
- Expands 4 independent RS-232/422/485 serial ports with communication speeds up to 921.6Kbps.
- 2KV surge protection for all serial signals meets IEC-61000-4-5 Level 3.
- With high reliable SUNIX PCI Express UART controller.
- Designed to meet PCI Express Base Specification Revision 2.0.
- RS-422 and RS-485 auto detect and switching technology – jumper and software free.
- AHDC/CS™ technology for collision free communication.
- On-chip hardware auto flow control to guarantee no data loss.
- Ultra low power consumption design for Green Environment.
Sunix ipc-E2204S Industrial 4-port RS-422/485 with Surge PCI-Express Serial Card
IN STOCK at EXTERNAL supplier
Price
R1,917
- Expands 4 RS-422/485 serial ports with communication speeds up to 921.6Kbps.
- 2KV surge protection for all serial signals meets IEC-61000-4-5 Level 3.
- With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
- Designed to meet PCI Express Base Specification Revision 2.0.
- RS-422 and RS-485 auto detect and switching technology – jumper and software free.
- AHDC/CS™ technology for collision free communication.
- On-chip hardware auto flow control to guarantee no data loss.
- Ultra low power consumption design for Green Environment.
- 15KV ESD protection for all serial signals meets IEC-61000-4-2 standard.
- Plug-n-Play, I/O address and IRQ assigned by BIOS.
- Certified by CE, FCC, VCCI, BSMI, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS OS.
Sunix ipc-E2202SL Industrial 2-port RS-422/485 Low Profile PCI-Express Serial Card with...
IN STOCK at EXTERNAL supplier
Price
R1,322
- Expands 2 RS-422/485 serial ports with communication speeds up to 921.6Kbps.
- 2KV surge protection for all serial signals meets IEC-61000-4-5 Level 3.
- With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
- Designed to meet PCI Express Base Specification Revision 2.0.
- RS-422 and RS-485 auto detect and switching technology – jumper and software free.
- AHDC/CS™ technology for collision free communication.
- On-chip hardware auto flow control to guarantee no data loss.
- Ultra low power consumption design for Green Environment.
- 15KV ESD protection for all serial signals meets IEC-61000-4-2 standard.
- Plug-n-Play, I/O address and IRQ assigned by BIOS.
- Certified by CE, FCC, VCCI, BSMI, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS OS.
Sunix DPSS02H00 DevicePort Sharing Mode Ethernet Enabled with WiFi Support
IN STOCK at EXTERNAL supplier
Price
R1,851
- DevicePort Sharing mode ethernet enabled with WiFi support
- Device sharing for connected peripherals to switch between multiple hosts
- 2x serial/RS-232 over ethernet ( 2xRJ45 )
- Upstream+downstream with daisy chain support upto 255x serial ports
- Auto-detect & port-mapping