The Lenovo ThinkCentre M72e is a...
TS-5, TOUGHSwitch PoE by Ubiquiti, is a cost-effective 5-port Gigabit switch with 24V PoE support for each port. It is ideal for powering Ubiquiti airMAX, UniFi, and airVision devices.
Input: 12-57V DC 2.1MM/Phoenix 3.5mm DC connector Output: 12-57V PER PORT( 1A Max) Data: 1/2&3/6&4/5&7/8 Power: 4/5 & 7/8 Data In: Connects PC/HUB/Switch Ethernet Cable : TIA/EIA 568 Cat. 5 Data rate: 10/100/1000Mbps Connector: RJ-45
Use this 8 Port Passive PoE injector to power up 8 Passive PoE devices through a single power source. Ideal for powering AP's, IP cameras or VoIP phones that do not require 802.3af.
POE-GIG adapter is designed to power any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an Ethernet cable to connect the injector to the RouterBOARD device. It can be used with any Gigabit RouterBOARD that supports 9-48V PoE
Input: 12 - 57V 8A Max (Use DC Jack) Input: 12 - 57V 16A Max (Use 3PIN connector ) - Data: 1/2&3/6 Power : 4/5 V+ & 7/8 V Data In: Connects PC/HUB/Switch Case material: metal Ethernet Cable : TIA/EIA 568 Cat. 5 Data rate: 10/100Mbps Connector: RJ-45
The PoE30G PoE Injector by Tenda delivers up to 30W PoE without sacrificing 10/100/1000 Ethernet speeds. By using this device, both data and power can be simultaneously delivered through a single CAT5 (or better) Ethernet cable to any 802.3af/at PoE device, eliminating the need to connect it to a nearby power outlet.
Injector Minimum voltage: 12V Injector Maximum voltage: 50V PoE splitter's power out adapter does NOT fit our Tenda range of products.
Power: PIN 4/5, 7/8 Data: PIN 1/2, 3/6 Data In: Connects PC/HUB/Switch Ethernet Data Rate: 10/100TX Mbps Ethernet Cable: Cat.5 / Cat.5e / Cat.6 Ethernet Cable Connector: RJ45 Built-In LED Indicators: Power
Power Input: 100-240Vac (18-57V DC In, minimum of 120W) Power Output: 18-57V, 1A Max per port Power: PIN +4/5 & -7/8, -1/2 & +3/6 Data: PIN 1/2, 3/6, 4/5, 7/8 Data In: Connects PC/HUB/Switch Ethernet Data Rate: 10/100/1000 TX Mbps
The POE-16 is a panel which integrates 16 passive POE injectors and is suitable for powering up to 16 devices with integrated PoE splitter. Very appropriate solutions to power wireless devices, IP phones, IP cameras, etc
The POW-5 is a 5V power supply and can be used with the Fanvil F52P, C58P and C62. 5.5mm x 2.5mm plug
12V power supply 2A
The EdgeSwitch™ Lite supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.
The TEF1105P by Tenda is a 5-port 10/100Mbps unmanaged switch that requires no configuration and provides 4 PoE ports. It can automatically detect and supply power to all IEEE 802.3af/at-compliant Powered Devices (PDs)
The POE-15F, PoE injector by Tenda enables synchronous delivery of data and power via a single Ethernet cable (Cat.5 or better). The output power per port is up to 15W, which can serve as an outlet for a PoE device
2 10/100/1000M Ethernet ports Optional 5/9/12V DC power output Deliver power up to about 328.1 feet(100 meters)
500 Mbps Data Transfer Rate 1 x Power Plug per Adapter 1 x 10/100 Mbps Ethernet Port Integrated Pair Button
Power Supply: 15.4W (Max. 48VDC) Expands network to areas with no power lines or outlets Ideal for use with access points and IP cameras Delivers power up to 100 meters (328 feet)
Supports Half & Full Duplex Operation IEE 802.3at/af Connectable 10/100/1000 Base-T Network Supported Output up to 32.4W Connect Speed up to 1000 Mb/s Easily Mountable Plug and Play Installation Wall or Ceiling Mountable
Input: 100-240Vac (18-57V Dc In) Output: 18-57V Data: 1/2&3/6&4/5&7/8 Power: 3/6+ & 1/2- ,4/5+ & 7/8- Data In: Connects PC/HUB/Switch
Provides 30W Output Power over Ethernet Over Current & Short-Circuit Protection Supports 802.3at and 802.3af
24 10/100Base-TX RJ45 ports, 2 10/100/1000Base-T RJ45 ports and 2 100/1000Base-X SFP combos Powerful port management functions i.e port mirroring, speed limit, trunk, etc 24 10/100Base-TX RJ45 ports support PoE power supply. Up to 370W total power output and 40W maximum output on a single port Supports Web, SNMP management and network diagnostics...
Power Input: 12-57V DC 2.1mm Power Output: 12-57V 1A Max per port Power: PIN 4/5, 7/8 Data: PIN 1/2, 3/6, 4/5, 7/8 Data In: Connects PC/HUB/Switch Ethernet Data Rate: 10/100/1000 TX Mbps
Networking Interface PoE In (802.3af): (1) Gigabit RJ45 Port Networking Interface PoE Out (24V Passive): (1) Gigabit Ethernet Cable Power Input : 48V, 802.3af Output Power: 18V, 0.7A Max Power Output: 24V, 0.5A Ethernet ESD/Surge Protection: ±15kV Dimensions: Ø 30.2 x 166 mm Dimensions with RJ45 Cable: Ø 30.2 x 366.6 mm Weight: 90g Operating Temperature:...
TP-LINK AV500 Nano Powerline Ethernet Adapter - Ultra Compact, 500Mbps Datarate, 100Mbps Fast Ethernet, HomePlug AV, Green Powerline, Plug And Play
Clamping Protection: 11V Data, 60V Power Gigabit LAN Port: Yes Input Voltage: 100-240AC 50/60Hz Input Current: 0.3A 120VAC, 0.2A 240VAC Max. Surge Discharge: 1500A (8/20 µs) Power
2-Pair Powering: Pins 4, 5 (+) and Pins 7, 8 (-) Data IN / POE: RJ45 Shielded Socket Surge Protection: Difference and Common Mode Clamping Protection: 11V Data, 60V Power Max. Surge Discharge: 1500A (8/20 µs) Power Peak Pulse Current: 36A (10/1000 µs) Data
Output Voltage: 50VDC 1.2A Input Voltage: 90-260VAC 47-63 Hz Remote Reset Capability: No Surge Protection: Difference and Common Mode Clamping Protection: 11V Data, 60V Power Max Surge Discharge: 1500A (8/20μS) Power Peak Pulse Current: 36A (10/1000μS) Data
Output Voltage: 24VDC 1A Remote Reset Capability: Yes Input Voltage: 90-260VAC 47-63 Hz Input Current: 0.3A 120VAC, 0.2A 240VAC Data IN / POE: RJ45 Shielded Socket Surge Protection: Difference and Common Mode Clamping Protection: 11V Data, 60V Power Max. Surge: 1500A (8/20µS) Power
Ideal when AC power is not available Full-power Class 3 PoE design Power output of up to 15.4 Watts Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
IEEE 802.3af-compliant PoE splitter Can be used to connect non-PoE IEEE 802.3af-compliant devices to a PoE injector or PoE switch Output current, selectable: 5, 7.5, 9 or 12 V DC 10/100 auto-sensing input port automatically detects optimal network speeds RJ45 input port with Auto-MDIX and NWay auto-negotiation support Compact metal case
Detects IEEE802.3af and IEEE802.3at Tests for both Endspan and Midspan power Compact design Plug and Play Simple and effective
Save time and money by delivering data and power via existing network cables Power output of up to 30 watts Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
Up to 300 Mbps network link speed Smoke detector design Complies with 2.4 GHz IEEE 802.11n standard and is backward compatible with IEEE 802.11g/b standards Supports WMM function to meet the multimedia data bandwidth requirement Easy installation through Web-based user interface DHCP server assigns IP addresses for all LAN users
High performance AC1750 PoE+ access point Access Point, Client, WDS AP, WDS Bridge, WDS Station, and Repeater modes Gigabit PoE+ LAN port Off-white low profile housing Ceiling / wall mounting plate Wireless Coverage
Save time and money by delivering data and power via existing network cables Power output of up to 30 watts Distance support: up to 100 m (328 ft.) Internal power supply Fanless design ideal for silent operation