A high-performance Ethernet cable designed for fast and stable network connections.
It features Shielded Foiled Twisted Pair (S/FTP) construction, which helps reduce interference and improve signal quality.
The 28AWG gauge ensures flexibility while maintaining durability, and the Bare Copper (BC) conductors provide excellent conductivity for reliable data transmission.
Experience reliable connectivity with the LC-LC Duplex 5m OM4 Power Cord, designed to meet your networking connection needs. This high-quality cable provides dependable performance for your setup.
Linkbasic's FDC-90M single core pre-terminated LC-LC (APC) single-mode fibre drop cable is designed for a quick and easy installation without the need for splicing.
It is a 'Bow Type', single-mode, G657A2, bend-insensitive, 1x core, FTTX drop cable. The outer jacket is 2x3mm and made from Low Smoke, Zero Halogen (LSZH) material ideally suited for both indoor and outdoor installations when used in ducting. The cable is reinforced with two 0.45mm phosphate wires to improve pull strength and provide resistance when bending around corners.
The Connect C5EUTP500 Cat5e UTP Grey Indoor Cable is a low-cost, high-quality Ethernet solution designed to meet all your indoor networking requirements. It delivers maximum bandwidth while ensuring ease of installation for your network setup.
The ST/UPC to LC/UPC Single Mode Duplex Fiber Optics Patch Cord provides reliable optical connections in network environments. Built with OFNR-rated jacketing, this 1m cable ensures dependable signal performance across single-mode fiber infrastructure.
Upgrade your connections with the F56 5.1 Self Install NiTin Connector. Designed for easy installation, this connector delivers reliable performance for your setup needs.
The SC to SC Duplex Multimode OM3 Fiber Patch Cord (3m) provides reliable optical connectivity for high-speed network infrastructure. Designed with SC connectors on both ends, this duplex multimode patch cable ensures consistent data transmission for network installations.
UltraLAN's FIB-SFP-ULSQ854XM-CDS1 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications.
This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications.
It integrates four data lanes in each direction with 40 Gbps bandwidth.one version is Each lane can operate at 10.5Gbps up to100m using OM3 or 150m using OM4 Multimode fiber,another version is Each lane can operate at 10.5Gbps up to300m using OM3 or 400m using OM4 Multimode fiber.
These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm.
The electrical interface uses a 38 contact edge type connector.
The optical interface uses an 12 fiber MTP (MPO) connector.
This module incorporates proven circuit and VCSEL technology to provide reliable longlife, high performance, and consistent service.
Product Applications: Product Features: UltraLAN Part Code Matrix:
The UltraLAN Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective modules compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.
3-2002 and IEEE 802.3ab, which supports up to Gigabit data rates up to 100 meters in distance over unshielded twisted-pair CAT5 cabling.
The module supports 1000Mbps (or 10/100/1000Mbps) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals.
All four pairs in the cable are used with symbol rate at 250Mbps on each pair.
This SFP module is compatible with all vendor devices that has an SFP slot.
Linkbasic’s LB-PP246A is a 19 inch, Rack-Mount, 24 Port Cat6a Patch Panel. This unit is manufactured from black electrostatic powder-coated steel for enhanced corrosion resistance.
*Note: Keystone jacks are included but not pre-installed.
UltraLAN's pre-terminated fiber drop cables are cost effective cable assemblies designed for linking FTTX equipment together easily and quickly, without the need for splicing.
This cable is a Bow Type, Single Mode, 1 core (simplex), FTTX cable which has LC APC connectors pre-terminated on both sides.
The outer jacket is 2x3mm and made from UV resistant, Low Smoke Zero Halogen (LSZH) material.
As the cable adheres to G657A2 specs, it is bend-insensitive, making for easier installations for both indoor or outdoor applications.
The cable is also supported by two 0.45mm phosphate wires internally, giving reinforcement to the cable when bending around corners and improving pull strength.
Upgrade your fiber optic connectivity with the OFNR SC/UPC to LC/UPC Single-Mode Duplex 3M Fiber Optic Patch Cord. Designed for reliable signal transmission, this cable ensures secure and efficient networking performance.
SC/UPC to LC/UPC connector types for versatile setup compatibility
Single-Mode (SM) fiber construction for long-distance data transmission
Duplex (DX) design supporting simultaneous bidirectional communication
UltraLAN's pre-terminated fiber drop cables are cost effective cable assemblies designed for linking FTTX equipment together easily and quickly, without the need for splicing.
This cable is a Bow Type, Single Mode, 2 core (duplex), FTTX cable which has LC APC connectors pre-terminated on both sides.
The outer jacket is 2x3mm and made from UV resistant, Low Smoke Zero Halogen (LSZH) material.
As the cable adheres to G657A2 specs, it is bend-insensitive, making for easier installations for both indoor or outdoor applications.
The cable is also supported by two 0.45mm phosphate wires internally, giving reinforcement to the cable when bending around corners and improving pull strength.
