Shelly Smart Wi-Fi Relay With Power Monitoring (Single Pack)
IN STOCK at EXTERNAL supplier
Price
R568
- Power metering: Yes
- Max load: 16A/240V
- Working temperature: 0°C up to 40°C
- Radio signal power: 1mW
- Radio protocol: Wi-Fi 802.11 b/g/n
- RF output Wi-Fi: 13.38 dBm
- RF output Bluetooth: 4.93 dBm
- Frequency Wi-Fi: 2412-2472 МHz; (Max. 2495 MHz)
- Frequency Bluetooth TX/RX: 2402- 2480 MHz (Max. 2483.5 MHz)
- Operational range (depending on local construction): - up to 50 m outdoors, up to 30 m indoors
- Dimensions (HxWxL): 41x36x16 mm
- Electrical consumption: < 1.2 W
- Mounting: Wall box
- Wi-Fi: Yes
- Bluetooth: v4.2
- Basic/EDR: Yes
- Bluetooth modulation: GFSK, π/4-DQPSK, 8-DPSK
- Bluetooth frequency TX/RX: 2402 - 2480MHz
- Temperature Protection: Yes
- Scripting (mjs): Yes
- HomeKit support: Yes
- MQTT: Yes
- URL Actions: 20
- Scheduling: 50
- AC power supply: 110-240V
- DC Power supply: 24-30V
Shelly Smart Wi-Fi Relay With Power Monitoring
IN STOCK at EXTERNAL supplier
Price
R872
- Wi-Fi Operated - Connect Shelly Plus 2PM to your Wi-Fi network. No HUB required!
- Cover (roller) control - Control two-directional AC motors and set your desired position.
- Bluetooth - Add devices quickly and easily via Bluetooth connection, using Shelly Cloud App.
- Custom schedules - Set custom schedules based on your daily agenda or follow the sunrise/sunset and control your lighting accordingly.
- Power monitoring - Two integrated precise power meters allow you to monitor the consumption for each channel.
- Smart scenes - Set custom scenes by combining Shelly Plus 2PM with your other Shelly devices
Vantec 5-Port USB 3.2 Gen2x2 (20Gbps) With 2C and 3A PCIe Host Card
IN STOCK at EXTERNAL supplier
Price
R1,092
- Support UASP Devices on both ports for extra boost in speed when using latest OS.
- Support PCI-Express 3.0 specifications for increase speed thru the PCIe Bus.
- Support for Windows and Linux OS for latest Technology
- USB 3.1 Type C Port for Newer devices and Type A for Compatibility with older USB 3.0 and 2.0.
- Full height PCIe x2 (requires x4 slot)
- Backward compatible with legacy USB 3.0, 2.0 and 1.1
- Compliant with extensible Host Controller interface specification Revision 1.1
- Support Control, Bulk, Stream, Interrupt, Isochronous transfer type
- Supports PCI Express Card Electromechanical Specification Release 2.0
- Supports PCI Bus Power Management Interface Specification Release 1.2
- Support driver on Windows 7 and native drivers within Windows 8/8.1/10
- Support Linux kernel 3.13.0 & above
Vantec UGT-ST400 2-Port eSATA II PCI Express Host Card
IN STOCK at EXTERNAL supplier
Price
R310
- External SATA II (eSATA) Connector
- 48 bits LBA can Break Capcity-Limit to Support HDD larger than 137GB
- Supports 1-lane 2.5Gbps PCI Express
- Hot-plug capability
- Supports SATA II transfer rate of 3.0Gbps
- Fully compliant with Serial ATA 1.0 specifications
- Supports two independent Serial ATA channels
- Independent Link, Transport, and data FIFO
- Independent command fetch, scatter/gather, and command execution
- Supports Legacy Command Queuing (LCQ)
- Supports Native Command Queuing (NCQ
- Supports Non-zero offsets NCQ
- Supports Non-zero offsets NCQ
- Supports FIS-base switching with Port Multipliers
- 31 Commands and Scatter/Gather Tables per Port
- Two Pin headers on board for LED connection
Vantec ugtPC371 2-Port USB 3.1 PCIe (10Gbps) USB C & USB Type-A
IN STOCK at EXTERNAL supplier
Price
R502
- Half height PCI_E add on card with 2 port USB 3.1 interface
- ASMedia Chipset, PCI Express to USB 3.1 host controller
- Compliant to Universal Serial Bus 3.1 specification Revision 1.0
- Backward compatible to USB 3.0 and 2.0
- Compliant with extensible Host Controller interface specification Revision 1.1
- Support Control, Bulk, Stream, Interrupt, Isochronous transfer type
- PCI Express with clocking speed up to 10Gbps
- Comes with low profile bracket for Slim Design Chassis
- Supports PCI Express® Card Electromechanical Specification Release 2.0
- Supports PCI Bus Power Management Interface Specification Release 1.2
- Support Windows 7 and native drivers for Windows 8/8.1/10
- Support Linux kernel 3.13.0 & above
- Support UASP Devices on both ports for extra boost in speed when using latest OS.
- Support PCI-Express 3.0 specifications for increase speed thru the PCIe Bus
- Support PCI-Express x4 slot interface with wider lanes for speed and large amount of data.
Vantec UGT-PC370A 2-Port USB 3.1 Gen II Type-A PCI-Express Card
IN STOCK at EXTERNAL supplier
Price
R515
- SuperSpeed Plus USB 3.1 Gen II up to 10 Gbps connection to give you Maximum Speed
- Full height PCIE Gen2 x 4 add on card with 2x USB 3.1 interfaces
- Chipset ASMedia ASM1142
- PCI Express to USB 3.1 host controller
- Compliant to Universal Serial Bus 3.1 specification Revision 1.0
- Backward compatible to USB 3.0 and 2.0
- Compliant with extensible Host Controller interface specification Revision 1.1
- Support Control, Bulk, Stream, Interrupt, Isochronous transfer types
- PCI Express Gen2 x 2 with speeds up to 10Gbps
- Supports PCI Express® Card Electromechanical Specification Release 2.0
- Supports PCI Bus Power Management Interface Specification Release 1.2
- Support driver on Windows 7 and native drivers for Windows 8/8.1