Single Port Gigabit PoE Injector
IN STOCK at EXTERNAL supplier
Price
R56
POE-GIG adapter is designed to power any RouterBOARD over Gigabit Ethernet.
Simply connect your power source and then use an Ethernet cable to connect the injector to the RouterBOARD device.
It can be used with any Gigabit RouterBOARD that supports 9-48V PoE
Vantec 5-Port USB 3.2 Gen2x2 (20Gbps) With 2C and 3A PCIe Host Card
IN STOCK at EXTERNAL supplier
Price
R1,092
- Support UASP Devices on both ports for extra boost in speed when using latest OS.
- Support PCI-Express 3.0 specifications for increase speed thru the PCIe Bus.
- Support for Windows and Linux OS for latest Technology
- USB 3.1 Type C Port for Newer devices and Type A for Compatibility with older USB 3.0 and 2.0.
- Full height PCIe x2 (requires x4 slot)
- Backward compatible with legacy USB 3.0, 2.0 and 1.1
- Compliant with extensible Host Controller interface specification Revision 1.1
- Support Control, Bulk, Stream, Interrupt, Isochronous transfer type
- Supports PCI Express Card Electromechanical Specification Release 2.0
- Supports PCI Bus Power Management Interface Specification Release 1.2
- Support driver on Windows 7 and native drivers within Windows 8/8.1/10
- Support Linux kernel 3.13.0 & above
Vantec UGT-ST400 2-Port eSATA II PCI Express Host Card
IN STOCK at EXTERNAL supplier
Price
R310
- External SATA II (eSATA) Connector
- 48 bits LBA can Break Capcity-Limit to Support HDD larger than 137GB
- Supports 1-lane 2.5Gbps PCI Express
- Hot-plug capability
- Supports SATA II transfer rate of 3.0Gbps
- Fully compliant with Serial ATA 1.0 specifications
- Supports two independent Serial ATA channels
- Independent Link, Transport, and data FIFO
- Independent command fetch, scatter/gather, and command execution
- Supports Legacy Command Queuing (LCQ)
- Supports Native Command Queuing (NCQ
- Supports Non-zero offsets NCQ
- Supports Non-zero offsets NCQ
- Supports FIS-base switching with Port Multipliers
- 31 Commands and Scatter/Gather Tables per Port
- Two Pin headers on board for LED connection
Vantec ugtPC371 2-Port USB 3.1 PCIe (10Gbps) USB C & USB Type-A
IN STOCK at EXTERNAL supplier
Price
R502
- Half height PCI_E add on card with 2 port USB 3.1 interface
- ASMedia Chipset, PCI Express to USB 3.1 host controller
- Compliant to Universal Serial Bus 3.1 specification Revision 1.0
- Backward compatible to USB 3.0 and 2.0
- Compliant with extensible Host Controller interface specification Revision 1.1
- Support Control, Bulk, Stream, Interrupt, Isochronous transfer type
- PCI Express with clocking speed up to 10Gbps
- Comes with low profile bracket for Slim Design Chassis
- Supports PCI Express® Card Electromechanical Specification Release 2.0
- Supports PCI Bus Power Management Interface Specification Release 1.2
- Support Windows 7 and native drivers for Windows 8/8.1/10
- Support Linux kernel 3.13.0 & above
- Support UASP Devices on both ports for extra boost in speed when using latest OS.
- Support PCI-Express 3.0 specifications for increase speed thru the PCIe Bus
- Support PCI-Express x4 slot interface with wider lanes for speed and large amount of data.
Vantec UGT-PC370A 2-Port USB 3.1 Gen II Type-A PCI-Express Card
IN STOCK at EXTERNAL supplier
Price
R515
- SuperSpeed Plus USB 3.1 Gen II up to 10 Gbps connection to give you Maximum Speed
- Full height PCIE Gen2 x 4 add on card with 2x USB 3.1 interfaces
- Chipset ASMedia ASM1142
- PCI Express to USB 3.1 host controller
- Compliant to Universal Serial Bus 3.1 specification Revision 1.0
- Backward compatible to USB 3.0 and 2.0
- Compliant with extensible Host Controller interface specification Revision 1.1
- Support Control, Bulk, Stream, Interrupt, Isochronous transfer types
- PCI Express Gen2 x 2 with speeds up to 10Gbps
- Supports PCI Express® Card Electromechanical Specification Release 2.0
- Supports PCI Bus Power Management Interface Specification Release 1.2
- Support driver on Windows 7 and native drivers for Windows 8/8.1