Networking Cables/Tools/Patch Panel

There are 920 products.

Showing 1-100 of 920 item(s)

Active filters

UTP Stripper Tool

IN STOCK at EXTERNAL supplier

Price R38

The cable stripping tool by Linkbasic is designed to reduce the time required to prepare both coaxial and twisted-pair cable for termination.

UTP Cable Tester

IN STOCK at EXTERNAL supplier

Price R156

The UTP Cable Tester by Linkbasic allows you to inspect/test network cable, BNC coaxial cable and USB signal cable, wire by wire.

UltraLAN SFP/SFP+ 10G DAC Cable - 3meter

IN STOCK at EXTERNAL supplier

Price R413
  • Support for multi-gigabit data rates up to 10.5Gbps
  • Data rates backward compatible to 1Gbps
  • Hot-pluggable SFP 20 PINs footprint
  • I/O Connector designed for high speed differential signal applications
  • Improved Pluggable Form Factor (IPF) compliant for enhanced EMI/EMC performance
  • Compatible to SFP+ MSA
  • RoHS compliant
  • Power Supply :+3.3V
  • Case operating temperature:  0°C to +70°C

UltraLAN SFP/SFP+ 10G DAC Cable - 1meter

IN STOCK at EXTERNAL supplier

Price R242
  • Support for multi-gigabit data rates up to 10.5Gbps
  • Data rates backward compatible to 1Gbps
  • Hot-pluggable SFP 20 PINs footprint
  • I/O Connector designed for high speed differential signal applications
  • Improved Pluggable Form Factor (IPF) compliant for enhanced EMI/EMC performance
  • Compatible to SFP+ MSA
  • RoHS compliant
  • Power Supply :+3.3V
  • Case operating temperature:  0°C to +70°C

UltraLAN SFP/SFP+ 10G AOC Cable - 5m

IN STOCK at EXTERNAL supplier

Price R684
  • Low power consumption <0.35W per end
  • Electrical interface compliant to SFF-8431
  • 850nm VCSEL transmitter, PIN photo-detector receiver
  • Operating case temperature 0 °C to +70°C
  • 3.3V power supply voltage
  • RoHS 6 compliant
  • Hot Pluggable SFP+ form factor
  • Good EMI performance

UltraLAN SFP+ Module - SM 10G 10KM 1310nm

IN STOCK at EXTERNAL supplier

Price R427
  • Supports up to 11.3Gb/s bit rates
  • Duplex LC connector
  • Hot pluggable SFP+ footprint
  • Uncooled 1310nm DFB transmitter, PIN photo-detector
  • Applicable for 10km SMF connections
  • Low power consumption, < 1W
  • Digital Diagnostic Monitor Interface
  • Optical interface compliant to IEEE 802.3ae 10GBASE-LR
  • Electrical interface compliant to SFF-8431

UltraLAN SFP+ Module - MM 10G 300m 850nm

IN STOCK at EXTERNAL supplier

Price R352
  • Supports up to 11.3Gb/s bit rates
  • Duplex LC connector
  • Hot pluggable SFP+ footprint
  • 850nm VCSEL transmitter, PIN photo-detector
  • Up to 300m on 50/125um MMF(2000MHZ.KM)
  • Low power consumption, < 1W
  • Digital Diagnostic Monitor Interface
  • Optical interface compliant to IEEE 802.3ae
  • Electrical interface compliant to SFF-8431

UltraLAN SFP Module - SM 1.25G 20KM 1310nm

IN STOCK at EXTERNAL supplier

Price R173
  • Supports 1.25Gbps/1.0625Gbps bit rates
  • Duplex LC connector
  • Hot pluggable SFP footprint
  • 1310nm FP laser transmitter and PIN photo-detector
  • Applicable for 20Km SMF connection
  • Low power consumption, < 0.8W
  • Digital Diagnostic Monitor Interface
  • Compliant with SFP MSA and SFF-8472
  • Very low EMI and excellent ESD protection

UltraLAN SFP Module - MM 1.25G 500m 850nm

IN STOCK at EXTERNAL supplier

Price R187
  • Supports 1.25Gbps/1.0625Gbps bit rates
  • Duplex LC connector
  • Hot pluggable SFP footprint
  • 850nm VSCEL laser transmitter and PIN photo-detector
  • Applicable for 500m on 50/125µm, 300m on 62.5/125µm MMF connection
  • Low power consumption, < 0.5W
  • Digital Diagnostic Monitor Interface
  • Compliant with SFP MSA and SFF-8472
  • Very low EMI and excellent ESD protection

UltraLAN RJ45 EZ Crimping Tool

IN STOCK at EXTERNAL supplier

Price R303
  • Zero flex frame prevents torque loss during the crimping cycle
  • Clean, ultra flush trim on the EZ-RJ45 extended conductors.
  • Expanded surface area on contact drivers delivers full, uniform crimp force.
  • Built-in cutter and stripper for flat and round cable.

UltraLAN QSFP+ 40G DAC Cable - 1meter

IN STOCK at EXTERNAL supplier

Price R621
  • Support for multi-gigabit data rates up to 40Gbps
  • Hot-pluggable QSFP+ footprint
  • Metal with lower EMI
  • Low Power Consumption < 0.5W
  • Power Supply :+3.3V
  • Compatible to QSFP+ MSA standards
  • Temperature Range: 0~ 70 ° C

UltraLAN QSFP Module - MM 40G 150m 850nm

IN STOCK at EXTERNAL supplier

Price R725
  • Supports 1.06 to 10.5Gb/s bit rates per Channel
  • Four-Channel ,1x12 MPO receptacle
  • Hot pluggable QSFP+ form factor
  • VCSEL 850nm array Technology
  • Applicable for 100m on OM3 MMF, 150m on OM4 MMF.
  • Built-in digital diagnostic functions
  • Low power consumption, < 1.5W
  • Unretimed XLPPI electrical interface
  • Operating case temperature: -5°C to 80 °C

UltraLAN Outdoor Bare Copper CAT5e FTP with Drain Wire (305m)

IN STOCK at EXTERNAL supplier

Price R3,030
  • Solid Bare Copper 0.50mm core for better conductivity and performance.
  • Multi-layered UV protected cable sheath allows for superior protection from the elements.
  • FTP (Foil Twisted Pair) cable provides excellent external interface mitigation.
  • Drain wire provides additional protection from ESD.
  • Meets and exceeds CAT5e rating (suitable for Gigabit applications)

UltraLAN Fiber Power Meter with VFL

IN STOCK at EXTERNAL supplier

Price R656
  • Measurement of the power of optical sender (dBm and W).
  • Insertion loss test of optical devices.
  • Check fiber breakage, winding, etc. with the Visual Fault Locator
  • FC, SC, ST, LC switchable (FC is included originally) 
  • 6 Wavelength: 850 / 1300 / 1310 / 1490 / 1550 / 1625nm (power meter)
  • Wavelength: 650nm ( visual fault locator)

UltraLAN Fiber Power Meter

IN STOCK at EXTERNAL supplier

Price R413
  • Probe Type: InGaAs
  • Wavelength Range: 800~1700nm
  • Display Resolution: Linear Display 0.1%; Logarithmic display 0.01dB
  • Working Temp(℃): -10~+60℃
  • Storage Temp(℃): -25~+70℃
  • Auto Switch-off Time: 10min

UltraLAN Fiber Optic Cable Stripper

IN STOCK at EXTERNAL supplier

Price R104
  • Used to strip fiber optic cables
  • Ergonomic handle design reduces hand fatigue
  • Dual function, strips jacket and buffer at the same time
  • For use with 125 micron fiber cables

UltraLAN Fiber Mini Power Meter

IN STOCK at EXTERNAL supplier

Price R483
  • LCD color screen for easy reading
  • Mini Optical power meter to measure fiber loss
  • With memory wavelength function
  • Able to identify working frequency
  • Supports user calibration
  • Support SC, FC, ST interface
  • Support linear (nW) and non-linear indicators (dB)
  • Lithium battery for power supply, or external power supply

UltraLAN Fiber Drop Cable Stripper

IN STOCK at EXTERNAL supplier

Price R132
  • Universal stripper designed for stripping Flat Drop Fiber Cable used in “Fiber to the Home” applications
  • One step stripping action that removes the jacket in two locations to expose the dielectric strength members and allowing the quick removal of the jacket
  • Tool is small and has a lightweight body for ease of use
  • Easily strips fiber drop cable in 3.1*2.0mm
  • Also suitable for 2.0mm, 3.0mm indoor fiber optic cable
  • Blade depth adjustable for protecting the fiber.
  • 2 straight blades in across and 1 round blade in lengthwise

UltraLAN CAT5/6/6A/7 Crimping Tool

IN STOCK at EXTERNAL supplier

Price R399
  • Able to crimp  CAT5/6/6A/7 RJ45 connectors
  • Straight action crimp with minimal hand force
  • Compact and rugged
  • Terminates to industry specified crimp heights

UltraLAN 24 Port Sliding Fiber Patch Panel

IN STOCK at EXTERNAL supplier

Price R725
  • Standard 1U 19" size and lightweight construction
  • Suitable for ribbon and single fiber cables
  • Various panel plates to fit different adapter interfaces
  • The front mark on the plate is easy to identify and operation
  • Please note: Fiber couplers are not included and are sold separately