Power over Ethernet

There are 131 products.

Showing 1-75 of 131 item(s)

Active filters

Single Port Gigabit PoE Injector

IN STOCK at EXTERNAL supplier

Price R56

POE-GIG adapter is designed to power any RouterBOARD over Gigabit Ethernet.

Simply connect your power source and then use an Ethernet cable to connect the injector to the RouterBOARD device.

It can be used with any Gigabit RouterBOARD that supports 9-48V PoE

Passive PoE Injector & Splitter Set

IN STOCK at EXTERNAL supplier

Price R43
  • Passive PoE Injector & Splitter Set
  • 1 PORT POE INJECTOR AND SPLITTER SIMPLE POE INJECTOR WHITE CABLE 100MB/S
  • POE-KIT is supplied as an injector and splitter combination. It is used to supply Fast Ethernet PoE to devices that do not have native PoE support. PoE range is limited to the tolerance of the end device after the voltage drop along the PoE run. Therefore, we do not recommend installation for distances longer than 30m.

Tenda 802.3af Fast Ethernet POE Injector

IN STOCK at EXTERNAL supplier

Price R166
  • Provides reliable power to your network devices 
  • Fast Ethernet data transfer speeds 
  • Compact and durable design 
  • Easy plug-and-play installation 
  • Supports a wide range of devices 
  • IEEE802.3af compliant 
  • Automatic detection and protection of non-standard Ethernet terminals 
  • LED indicators for easy monitoring of power status 
  • Overload and short-circuit protection to safeguard your network equipment

Ubiquiti Gigabit PoE Adapter 24V 7W

IN STOCK at EXTERNAL supplier

Price R174
  • Ethernet Ports: 2x 10/100/1000
  • Operating Temperature: 0°C to 40°C
  • PoE Output: 24V 0.3A Passive PoE
  • Supported Voltage Range: 100V-240V

*Note: Power Cable Not Included, we recommend POWU.

Tenda 10/100Mbps PoE Injector

IN STOCK at EXTERNAL supplier

Price R198
  • Delivers power and data through one Ethernet cable for easy network extension
  • Compatible with IEEE 802.3af compliant powered devices
  • PoE Port Delivers power up to 100 meters
  • Plug and Play, no configuration required

4-Port Gigabit Passive PoE Injector

IN STOCK at EXTERNAL supplier

Price R256
  • Power Input: 12-57V DC
  • Power Output: 12-57V 1A Max per port
  • Power: PIN 4/5, 7/8
  • Data: PIN 1/2, 3/6, 4/5, 7/8
  • Ethernet Data Rate: 10/100/1000 TX Mbps
  • Operating Temperature: -0°C ~ 40°C
  • Storage Temperature: -40°C ~ 70°C
  • Operating Humidity: 10% to 80% Non-Condensing
  • Storage Humidity: 5% to 90% Non-Condensing

MikroTik Indoor Gigabit PoE Injector with Surge Protection

IN STOCK at EXTERNAL supplier

Price R292
  • Data Line Protection: RJ45 10/100/1000 Ethernet
  • DC Spark-Over Voltage: 75V @ 100V/s
  • Discharge Current: 3kA (8/20μs)
  • Ethernet Ports: 1x 10/100/1000
  • Maximum Impulse Spark-Over Voltage: 700V @ 1kV/µs
  • Operating Temperature: -40 to 70°C
  • PoE Support: Passive

Ubiquiti 48V 0.5A PoE Adapter

IN STOCK at EXTERNAL supplier

Price R360
  • The PoE Adapters are compatible with most Ubiquiti Networks PoE devices:
  • airFiber
  • airMAX
  • EdgeMAX
  • mFi
  • UniFi AP
  • UniFi Video / airVision

8 Port Gigabit Passive PoE Injector

IN STOCK at EXTERNAL supplier

Price R342
  • Input: 12-57V DC 2.1MM/Phoenix 3.5mm DC connector
  • Output: 12-57V PER PORT( 1A Max)
  • Data: 1/2&3/6&4/5&7/8
  • Power: 4/5 & 7/8
  • Data In: Connects PC/HUB/Switch
  • Ethernet Cable : TIA/EIA 568 Cat. 5
  • Data rate: 10/100/1000Mbps
  • Connector: RJ-45

Intellinet 502900 Power over Ethernet (PoE) Splitter

IN STOCK at EXTERNAL supplier

Price R666
  • IEEE 802.3af-compliant PoE splitter 
  • Can be used to connect non-PoE IEEE 802.3af-compliant devices to a PoE injector or PoE switch 
  • Output current, selectable: 5, 7.5, 9 or 12 V DC 
  • 10/100 auto-sensing input port automatically detects optimal network speeds 
  • RJ45 input port with Auto-MDIX and NWay auto-negotiation support 
  • Compact metal case

TP-Link TL-POE160S Dual Port PoE+ Injector (30W 51VDC)

IN STOCK at EXTERNAL supplier

Price R395
  • 2 Gigabit ports ensure faster transmission
  • Complies with IEEE802.3af/at standards, supplies up to 30 W
  • Reduces infrastructure costs by transmitting data and power simultaneously via an Ethernet cable
  • Automatically determines and supplies the exact power to meet the device's need
  • Wall-mounting and desktop design accommodates most installation scenarios
  • Plug & Play installation, requires no configuration
  • Integrated power supply

Tenda POE30G-AT PoE Injector

IN STOCK at EXTERNAL supplier

Price R408
  • PoE ports supports IEEE802.3at and IEEE802.3af standard
  • Equipped with gigabit port, blazing-fast tranfer rate, maximum transfer rate of up to 30W for single port
  • Power distance extension of up to 100 meters for standard cat. 5e and cat. 6 Ethernet cable
  • Plug and play, no any configuration required

D-Link DPE-301GS 1port Gigabit POE+ Splitter

IN STOCK at EXTERNAL supplier

Price R422
  • Converts incoming power from a PoE switch or injector to low-voltage DC power
  • Ideal for non-PoE access points, IP cameras and VoIP phones
  • Supports 5V, 9V and 12V via selectable switch
  • Lightweight, compact and easy to install
  • Supports 802.3af / 802.3at

Switchcom 8-Port Gigabit PoE Injector - Power & Connect 8 Devices

IN STOCK at EXTERNAL supplier

Price R466
  • Switchcom POE-8-G is an 8-Port Gig Passive POE Injector.
  • Efficiently delivers Power over Ethernet (POE) to connected devices.
  • Designed for reliable and seamless power distribution in various networking setups.
  • Suitable for both residential and commercial environments.
  • Simplifies cable management and reduces the need for additional power sources.
  • Ensures a stable and robust connection for POE-enabled devices.

Ubiquiti 802.3af to 24VDC Gigabit Outdoor Adapter

IN STOCK at EXTERNAL supplier

Price R491
  • Networking Interface PoE In (802.3af): (1) Gigabit RJ45 Port
  • Networking Interface PoE Out (24V Passive): (1) Gigabit Ethernet Cable
  • Power Input : 48V, 802.3af
  • Output Power: 18V, 0.7A
  • Max Power Output: 24V, 0.5A
  • Ethernet ESD/Surge Protection: ±15kV
  • Dimensions: Ø 30.2 x 166 mm
  • Dimensions with RJ45 Cable: Ø 30.2 x 366.6 mm
  • Weight: 90g
  • Operating Temperature: -30 to 70° C

D-Link DPE-301GI 1-Port Gigabit PoE+ Injector

IN STOCK at EXTERNAL supplier

Price R621
  • Supports Half & Full Duplex Operation
  • IEE 802.3at/af Connectable
  • 10/100/1000 Base-T Network Supported
  • Output up to 32.4W
  • Connect Speed up to 1000 Mb/s
  • Easily Mountable
  • Plug and Play Installation
  • Wall or Ceiling Mountable

Cudy 2-Channel 30W Gigabit PoE+ Injector

IN STOCK at EXTERNAL supplier

Price R583
  • Full IEEE 802.3af IEEE 802.3at Compliant
  • Up to 30W of power output on 2-pairs for per port
  • Auto-detect of POE IEEE 802.3af IEEE 802.3at equipment
  • Supports 10/100/1000Base-T applications
  • LED indicators AC power input and POE output
  • Distance up to 100 meters
  • Internal AC/DC converter – no need for an external power brick
  • Easy plug-and-play installation
  • Surge protection

Dlink DPE-301Gi 1-Port Gigabit PoE+ Injector

IN STOCK at EXTERNAL supplier

Price R581
  • Ethernet interface type: Fast, Gigabit,
  • Ethernet LAN data rates: 10,100,1000 Mbit/s.
  • Colour of product: White,
  • Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u,
  • Certification: CE, FCC, VCCI, RCM.
  • Output power: 32.4 W,
  • AC adapter input voltage: 100 - 240 V,
  • AC adapter frequency: 50/60 Hz

Cudy 60W Gigabit PoE+ Injector

IN STOCK at EXTERNAL supplier

Price R692
  • Up to 60 watts PoE power supply
  • 1 10/100/1000M Ethernet Input port
  • 1 10/100/1000M PoE Output port
  • IEEE 802.3at / IEEE 802.3af standard compliant
  • Plug&play, simple setup with no configuration needed