Antec CX MIRROR ARGB ATX Mid-Tower Gaming Chassis - Black
Get registered and you will earn 15 points
(Each R100 spent = 1 point).Your cart will total 15 points.
Mid-Tower | ATX · Micro-ATX · ITX | 270° Panoramic Glass | 7 ARGB Fans Pre-Installed | Dual 360mm Radiator Support
Quick Specs
- Show off your rig through a sweeping 270° panoramic tempered-glass view
- Cool hard with 7 pre-installed ARGB fans and bottom-to-top vertical airflow
- Sync your lighting instantly using the included 4-port ARGB controller
- Mount serious liquid cooling with dual 360mm radiator support
- Fit flagship hardware with up to 415mm GPU and 155mm cooler clearance
A Panoramic 270° View of Your Build
The Antec CX Mirror puts your hardware centre stage. Its wraparound tempered-glass front and side panels open up a 270° panoramic view, so every cable run, RGB accent and GPU backplate is on full display. It’s a chassis built for people who want their build seen, not hidden away in a metal box.
Vertical Cooling, Engineered for Heat
Rather than fighting gravity, the CX Mirror works with it. A vertical airflow design draws cool air in from the bottom and channels heat straight up and out, supporting up to 10 fans simultaneously for rapid heat extraction. The dual-chamber layout keeps the power supply in its own compartment with independent cooling, leaving the main chamber clear for airflow and a tidy build.
Seven ARGB Fans, Ready Out of the Box
There’s no need to buy fans separately to get the glow going. The CX Mirror ships with 7 pre-installed 120mm ARGB fans — three reverse-blade fans along the bottom, three more on the right side, and one at the rear. A 1-to-3 3-pin splitter cable and a 4-port ARGB controller are included too, so you can sync effects across the whole case from the moment you power on.
Built for High-End Water Cooling
Custom and AIO liquid cooling fit comfortably in this chassis. The CX Mirror supports 360mm radiators at both the top and bottom, plus a 240mm radiator on the right side. When pairing a right-side radiator and fans, keep the combined thickness under 70mm to avoid clashing with the graphics card. Magnetic dust filters on the top and bottom keep airflow clean without choking it.
Room for the Biggest GPUs
Lengthy modern graphics cards are no problem here. The CX Mirror clears GPUs up to 415mm long and CPU coolers up to 155mm tall, comfortably accommodating the latest RTX 50 Series cards and large air coolers alike. A removable HDD cage and up to 93.5mm of cable management space round out a layout designed to make even an ambitious build straightforward.
FEATURES:
- Panoramic 270° wraparound tempered-glass front and side panels
- Dual-chamber layout with a top-mounted PSU and independent cooling
- Vertical airflow design supporting up to 10 fans for rapid heat extraction
- 7 pre-installed ARGB fans: 3 x 120mm reverse (bottom), 3 x 120mm reverse (right), 1 x 120mm (rear)
- Included 1-to-3 3-pin splitter cable and 4-port ARGB controller
- Versatile water cooling with 360mm top, 360mm bottom and 240mm right-side radiator support
- Removable HDD cage supporting 1 x 3.5" HDD and 2 x 2.5" SSDs
- Magnetic dust filters on the top and bottom panels
- Front I/O with USB Type-C 3.2 Gen 1 (5Gbps), USB 3.0, USB 2.0, headphone/mic combo jack and LED control button
- Up to 93.5mm of cable management space
SPECIFICATIONS:
- Form Factor: Mid Tower
- Motherboard Support: ATX, Micro-ATX, ITX
- Materials: Steel + Tempered Glass
- Side Panel: Tempered Glass
- Front I/O: Power, LED Control Button, 1 x USB 2.0, 1 x USB 3.0, 1 x USB Type-C 3.2 Gen 1 (5Gbps), Headphone/Mic Combo Jack
- Expansion Slots: 7
- Drive Bays: 1 x 3.5", 2 x 2.5"
- Fan Support:
- Top: 3 x 120mm / 2 x 140mm
- Right Side: 3 x 120mm
- Bottom: 3 x 120mm
- Rear: 1 x 120mm
- Included Fans: 7 x 120mm ARGB (3 reverse bottom, 3 reverse right, 1 rear)
- Radiator Support:
- Top: 120 / 140 / 240 / 280 / 360mm
- Right Side: 120 / 240mm
- Bottom: 120 / 240 / 360mm
- Max GPU Length: ≤415mm
- Max CPU Cooler Height: ≤155mm
- Max PSU Length: ≤180mm (cable excluded)
- Dust Filters: Top / Bottom
- Product Dimensions: 43.8 x 27.5 x 40 cm (D x W x H)
- Product Weight: 5890 g
WHAT'S IN THE BOX:
- Antec CX Mirror ARGB Mid-Tower Gaming Chassis x1
- 1-To-3 3-Pin Splitter Cable x1
- 4-Port ARGB Controller x1
Why Antec?
Antec is a long-standing favourite among South African PC builders, with a reputation for chassis that balance striking design, smart cooling and real value. The CX Mirror ARGB mid-tower carries that pedigree forward, pairing a show-stopping panoramic glass design with serious airflow and water-cooling support. For local gamers who want a standout build without overspending, this ARGB gaming chassis is one of the most eye-catching ways to house your hardware.
IN STOCK at EXTERNAL supplier.
If ordered before 10AM:
DELIVERED next business day (main centres)
or 3-5 business days (regional areas or large items)
COLLECTION from GeeWiz available Same Day (approx 4:30pm)
Mid-Tower | ATX · Micro-ATX · ITX | 270° Panoramic Glass | 7 ARGB Fans Pre-Installed | Dual 360mm Radiator Support
Quick Specs
- Show off your rig through a sweeping 270° panoramic tempered-glass view
- Cool hard with 7 pre-installed ARGB fans and bottom-to-top vertical airflow
- Sync your lighting instantly using the included 4-port ARGB controller
- Mount serious liquid cooling with dual 360mm radiator support
- Fit flagship hardware with up to 415mm GPU and 155mm cooler clearance
A Panoramic 270° View of Your Build
The Antec CX Mirror puts your hardware centre stage. Its wraparound tempered-glass front and side panels open up a 270° panoramic view, so every cable run, RGB accent and GPU backplate is on full display. It’s a chassis built for people who want their build seen, not hidden away in a metal box.
Vertical Cooling, Engineered for Heat
Rather than fighting gravity, the CX Mirror works with it. A vertical airflow design draws cool air in from the bottom and channels heat straight up and out, supporting up to 10 fans simultaneously for rapid heat extraction. The dual-chamber layout keeps the power supply in its own compartment with independent cooling, leaving the main chamber clear for airflow and a tidy build.
Seven ARGB Fans, Ready Out of the Box
There’s no need to buy fans separately to get the glow going. The CX Mirror ships with 7 pre-installed 120mm ARGB fans — three reverse-blade fans along the bottom, three more on the right side, and one at the rear. A 1-to-3 3-pin splitter cable and a 4-port ARGB controller are included too, so you can sync effects across the whole case from the moment you power on.
Built for High-End Water Cooling
Custom and AIO liquid cooling fit comfortably in this chassis. The CX Mirror supports 360mm radiators at both the top and bottom, plus a 240mm radiator on the right side. When pairing a right-side radiator and fans, keep the combined thickness under 70mm to avoid clashing with the graphics card. Magnetic dust filters on the top and bottom keep airflow clean without choking it.
Room for the Biggest GPUs
Lengthy modern graphics cards are no problem here. The CX Mirror clears GPUs up to 415mm long and CPU coolers up to 155mm tall, comfortably accommodating the latest RTX 50 Series cards and large air coolers alike. A removable HDD cage and up to 93.5mm of cable management space round out a layout designed to make even an ambitious build straightforward.
FEATURES:
- Panoramic 270° wraparound tempered-glass front and side panels
- Dual-chamber layout with a top-mounted PSU and independent cooling
- Vertical airflow design supporting up to 10 fans for rapid heat extraction
- 7 pre-installed ARGB fans: 3 x 120mm reverse (bottom), 3 x 120mm reverse (right), 1 x 120mm (rear)
- Included 1-to-3 3-pin splitter cable and 4-port ARGB controller
- Versatile water cooling with 360mm top, 360mm bottom and 240mm right-side radiator support
- Removable HDD cage supporting 1 x 3.5" HDD and 2 x 2.5" SSDs
- Magnetic dust filters on the top and bottom panels
- Front I/O with USB Type-C 3.2 Gen 1 (5Gbps), USB 3.0, USB 2.0, headphone/mic combo jack and LED control button
- Up to 93.5mm of cable management space
SPECIFICATIONS:
- Form Factor: Mid Tower
- Motherboard Support: ATX, Micro-ATX, ITX
- Materials: Steel + Tempered Glass
- Side Panel: Tempered Glass
- Front I/O: Power, LED Control Button, 1 x USB 2.0, 1 x USB 3.0, 1 x USB Type-C 3.2 Gen 1 (5Gbps), Headphone/Mic Combo Jack
- Expansion Slots: 7
- Drive Bays: 1 x 3.5", 2 x 2.5"
- Fan Support:
- Top: 3 x 120mm / 2 x 140mm
- Right Side: 3 x 120mm
- Bottom: 3 x 120mm
- Rear: 1 x 120mm
- Included Fans: 7 x 120mm ARGB (3 reverse bottom, 3 reverse right, 1 rear)
- Radiator Support:
- Top: 120 / 140 / 240 / 280 / 360mm
- Right Side: 120 / 240mm
- Bottom: 120 / 240 / 360mm
- Max GPU Length: ≤415mm
- Max CPU Cooler Height: ≤155mm
- Max PSU Length: ≤180mm (cable excluded)
- Dust Filters: Top / Bottom
- Product Dimensions: 43.8 x 27.5 x 40 cm (D x W x H)
- Product Weight: 5890 g
WHAT'S IN THE BOX:
- Antec CX Mirror ARGB Mid-Tower Gaming Chassis x1
- 1-To-3 3-Pin Splitter Cable x1
- 4-Port ARGB Controller x1
Why Antec?
Antec is a long-standing favourite among South African PC builders, with a reputation for chassis that balance striking design, smart cooling and real value. The CX Mirror ARGB mid-tower carries that pedigree forward, pairing a show-stopping panoramic glass design with serious airflow and water-cooling support. For local gamers who want a standout build without overspending, this ARGB gaming chassis is one of the most eye-catching ways to house your hardware.
- Returns Policy
-
Return of merchandise (RMA) and Warranty
We want you to be happy with the purchase you have made from us. If you are not completely satisfied, you may return the product to us and we will either refund, credit, repair/replace it, subject to the below terms and conditions.
You can return purchases for a refund (excl shipping). Please notify us within 7 days and ensure item is ready maximum 10 days after delivery date.
Please ensure to log your return request within 7 days of receipt of your item. Please ensure to select the correct reason for return:
- Changed my mind / Item exchange
- Faulty on arrival
- Incorrect item received
All items are covered by a 12 month warranty (unless otherwise stated) which will be honoured directly by GeeWiz. All products will either be replaced/repaired/refunded depending on stock availability. Products will require evaluation by GeeWiz before a warranty claim can be accepted.
Should the item being returned for assessment be found to be in good working order, unfortunately, there will be a collection fee that will apply.
The collection fees are as follows:
- For returns on items that were sent with free shipping: R198
- For returns that had a surcharge, the same surcharge will apply for collection.
Please log your return on your account, under the returns manager.
We do not reimburse your fee to ship to us, but we will pay for return shipping if the item is subject to replacement. If the item you wish to return was ordered incorrectly / is no longer required / you have changed your mind, there is a collection fee that will be charged (please refer to the above) and this will be deducted from the refund amount once the supplier has credited us. Please note GeeWiz will only cover return shipping of a faulty unit within 6 months of purchase, after which, a shipping fee (starting from R198) will be applicable to you for the return of the unit.
Any disputes relating to ordered items being short/incorrectly shipped will only be entertained if reported to GeeWiz within 3 days of delivery/collection.
Refunds are subject to inspection of item(s) - in some cases, items will need to be sent to supplier for evaluation and testing. This can take up to 15 working days. Once a refund has been approved, this may take 3 - 5 business days to be processed.
ALL returns are subject to up to a 30% restocking fee if item is no longer in BRAND NEW condition or if item seal/packaging has been broken.
Please re-package safely and include all original product packaging.
All software products are unfortunately not eligible for credit or refund once purchased.
After the 6-month period, you will no longer be eligible and won't be able to receive a refund. We can however replace or repair depending on the outcome after our team of professionals has inspected the product.
Should a warranty sticker not be present on an item, the warranty is immediately null and void.
Batteries are covered under warranty, but please note that GEL, AGM and LEAD ACID have limited cycle runs. These are typically around 200 cycles and may run out before the end of the warranty. Once the cycles have been depleted, it means the battery has reached the end of life and will no longer be a warranty claim.
GeeWiz reserves the right to refuse a refund if the item is damaged from misuse, items are missing, or if the product is altered in any way.
GeeWiz or its affiliates are not responsible for damage or loss of any kind that may occur as a result of using or misusing any product purchased from us.
The warranty will no longer be valid, and GeeWiz will not be responsible for damage or injury of any kind resulting from:
- Electricity fluctuations and surges, lightning strikes, faults in the building wiring, faulty installations, and improper use of controls
- Failure to use the product in accordance with the operating instructions and or general misuse and or abuse
- Damage caused by a superior force (vis major) or if the product has been infested with insects or pests
- If the product is physically damaged after it left the store
- If water or liquid caused the damage to the product
- If the warranty seal is tampered with
- Any repair or tampering by an unauthorised person or attempt to repair or tamper with the equipment, or use of parts not supplied by authorised agents, or alterations or modification to the equipment shall render the warranty null and void.
For hygiene purposes.
Please note we cannot accept returns for apparel that has been worn, stained, frayed, or otherwise shows signs of use.
We can only accept returns for items that are damaged upon receipt or are faulty.
Click here to get more details
If you have any further questions, please feel free to use the form below to ask:
Related products
(8 other products in the same category)

