Networking

Networking products | Wifi/3G Boosters, Adapters and Extenders

There are 298 products.

Showing 1-30 of 298 item(s)

Ubiquiti U Fiber RJ45 Module SFP 1G

IN STOCK at EXTERNAL supplier

Price R390
  • Ubiquiti Networks offers a variety of U® Fiber modules to suit your fiber connectivity applications.
  • To connect copper Ethernet cables to SFP ports, use the UF-RJ45-10G in an SFP+ port for speeds of up to 10 Gbps and distances of up to 30 m, or use the UF-RJ45-1G in an SFP port for speeds of up to 1 Gbps and distances of up to 100m.

Sunix CBSA20 E-SATA 2-port PCMCIA/Cardbus Card

IN STOCK at EXTERNAL supplier

Price R184
  • Two independent Serial ATA channels
  • Data transfer rate up to 1.5 Gbps (150 Mbps)
  • Compliance with Serial ATA v1.1
  • Supports large capacity disk drive than 137GB
  • Supports PIO and DMA modes
  • Compatible with 32-bit Cardbus
  • Supports Windows O.S.

Sunix ECSA14 Serial ATA II ExpressCard

IN STOCK at EXTERNAL supplier

Price R290
  • Supports PCI Express Base Specification Revision 1.0a.
  • Single-lane (x1) PCI Express throughput rates up to 2.5 Gbps.
  • Compliant with ExpressCard 34/54mm module specification.
  • Compliant with Serial ATA II: Extensions to Serial ATA 1.0a.
  • Built-in one high speed 3.0Gbps SATA II external port.
  • Supports Native Command Queue (NCQ) on SATA II port.
  • Supports Port Multiplier with Command-based Switching on SATA II port.
  • ExpressCard hot plugging and hot swapping features.

Optcore QSFP-100G-CIR4 (CWDM4) transceiver

IN STOCK at EXTERNAL supplier

Price R1,951
  • The 100G QSFP28 CWDM4 optical transceiver is a high-performance solution for long-range 100GbE connectivity over single-mode fiber.
  • Designed for data centers and enterprise networks
  • it delivers reliable 100Gbps transmission up to 2km with low power consumption and high efficiency.

Ubiquiti UFiber WiFi 2.4GHz 4 Gigabit Ports 1SC APC GPON ONU / UF-WIFI

IN STOCK at EXTERNAL supplier

Price R1,553
  • Intuitive, Graphical Web UI
  • Quick Configuration and Deployment of UFiber Devices
  • Centralized Management of Multiple GPON Networks/Sites
  • Visual Reports for Efficient Monitoring and Troubleshooting
  • Linux-based Software Installation
  • Bundled Software – No Licensing or Support Fees

PLEASE NOTE - By default, for powered items, Ubiquiti includes adapter plugs that are not suited for South Africa. In these cases, the wrong adapter plug will carefully be removed from the box and a South African compatible plug will be sent separately.

Ubiquiti UFiber WiFi GPON CPE with 4 Ethernet Ports

IN STOCK at EXTERNAL supplier

Price R1,644
  • Sporting a sleek industrial design, the UFiber WiFi is a robust, high-performance GPON CPE that features an informational LED display with 4 Ethernet ports and WiFi.
  • Status LEDs The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power.
  • Versatile Power The 4 Ethernet LAN ports support 10/100/1000 Mbps connections.
  • The UFiber WiFi can be powered using 24V passive PoE on Port 1, or by 24VDC.

Sunix SER6437PHL 2-port RS-232 High Speed PCI Express Low Profile Board with Power...

IN STOCK at EXTERNAL supplier

Price R991
  • Expands two independent RS-232 serial ports with communication speeds up to 921.6Kbps.
  • With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
  • Provides RS-232 serial ports with +5 or +12 VDC power output via COM 1st or 9th pin.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Low profile bracket design idea for slim or portable PC.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Sunix 6437A PCI Express Board - 2 Port / RS-232

IN STOCK at EXTERNAL supplier

Price R528
  • Expands 2 independent RS-232 serial ports with communication speeds up to 115.2Kbps
  • With highly reliable SUNIX SUN2212 PuLao native PCI Express 16C950 UART controller
  • Designed to meet PCI Express Base Specification Revision 2.0
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys
  • On-chip hardware auto flow control to guarantee no data loss
  • Built-in ± 15KV ESD protection for all serial signals meets the IEC1000-4-2 standard
  • Plug-n-Play, I/O address, and IRQ assigned by BIOS
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval
  • Support Microsoft Windows, Linux, and DOS

10G SFP to RJ45 Module 30m

IN STOCK at EXTERNAL supplier

Price R1,062
  • The CLT-SFP-RJ45-10G is a 10 Gigabit SFP to RJ45 transceiver module designed for copper Ethernet connections.
  • It supports data transmission over Cat6a or Cat7 cabling up to 30 metres.
  • This module converts SFP+ optical interfaces to standard RJ45 ports, enabling high-speed connectivity in data centres and enterprise networks.
  • It operates with full-duplex transmission and complies with IEEE 802.3bz standards for 10GBASE-T.

Ubiquiti UniFi WiFi 6 Dual Band 4x4 MU-MIMO Mesh AP / U6-MESH

IN STOCK at EXTERNAL supplier

Price R4,130
  • Antenna Gain: 2.4GHz: 3dBi, 5.8GHz: 5dBi
  • Beam-width: 360°
  • Data Rate: 2.4GHz: 574Mbps, 5.8GHz: 4.8Gbps
  • Ethernet Ports: 1x 10/100/1000
  • Hardware Button: Reset
  • Max. Power Consumption: 11.4W
  • Mounting: Desktop, Wall-Mount, Pole Mount, Ceiling Mount
  • Operating System: UniFi
  • PoE Input: 802.3af PoE
  • Power Input: 48V, 0.32A PoE Injector (Included)

PLEASE NOTE - By default, for powered items, Ubiquiti includes adapter plugs that are not suited for South Africa. In these cases, the wrong adapter plug will carefully be removed from the box and a South African compatible plug will be sent separately.