Unitek S1232A01 | USB Type-C to NVMe M.2 SSD and SATA SSD/HDD Adapter
IN STOCK at EXTERNAL supplier
- Supports UASP and TRIM commands
- Tool-Free NVMe SSD Adapter - The open design is compatible with any size of M.2 SSD
Vizo Voyager 2 HCL-102 - 1 Fan HDD Cooler - Silver
IN STOCK at EXTERNAL supplier
- For 3.5" HDD
- Full aluminum alloy frame
- Single powerful quiet fan provides the maximum airflow and air pressure
- Low dBA level
- Easy to install
- Reduce hard disk drive temperature
- Extend hard disk drive lifetime
- Cool stuff to decorate your PC
Synology HAT5300 | 12TB 3.5" Enterprise Series SATA Hard Drives for Synology Systems
IN STOCK at EXTERNAL supplier
- Enterprise Reliability and Durability
- Persistent Write Cache Technology
- Better Together
- One-Stop Update
Synology SNV3510 M.2 800GB PCI Express 3.0 NVMe Internal SSD
IN STOCK at EXTERNAL supplier
- SSD capacity: 800 GB,
- SSD form factor: M.2,
- Read speed: 3100 MB/s,
- Write speed: 1000 MB/s,
- Component for: NAS
Synology SAT5210-1920G 2.5-inch 1.9TB Serial ATA III Internal SSD
IN STOCK at EXTERNAL supplier
- SSD capacity: 1920 GB,
- SSD form factor: 2.5",
- Component for: NAS
Vantec ICEBERG Q M.2 NVME 2280 SSD Heat Sink - Black
IN STOCK at EXTERNAL supplier
- Maximum Heat Dissipation using High Vented Fins Heat Sink
- Fit Standard Single or Double Sided Size M.2 2280 NVMe/SSD
- Uses Aluminum Alloy with Dual Thermal pad with Heat Dissipating Properties
- Maximum Cooling for NVMe/SSD Module on Both Sides
- Dual Function Thermal Pads to Dampen Vibration and Contact on both sides
- Thumb Screws for easy & secure mounting to last and will not break down.
- Flat Based Contact for Maximum Heat Dissipation on whole module
- Available in Black, Red or Blue Color Heat Sink
Vantec 4 Channel 2 MSATA + 2 SATA 6Gb/S PCIe RAID Card With HyperDuo
IN STOCK at EXTERNAL supplier
- Two 7Pin SATA connectors and two mSATA (mini PCIe) socket on board
- Mounts two mSATA SSDs and two SATA HDDs/SSDs in PCIe slot
- Compliant with PCI-Express Specification v2.0 and backward compatible with PCI-Express 1.x
- Compliant with Serial ATA Specification 3.0
- PCI Express x2 interface, and compatible with PCI Express x4, x8 and x16 slots
- Supports communication speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
- HyperDuo technology to maximum SSD performance
- Support TRIM to extend SSD durability
- Hot Plug and Hot Swap on SATA connection
- Supports Port Multiplier FIS/CBS and Native Command Queuing (NCQ)
- Support ATA and ATAPI commands
- Compatible with SATA III/II/I Hard Drives
- Support RAID function: RAID 0, RAID 1, RAID 10 and HyperDuo
Synology HAT5300-16T 16TB 3.5'' Enterprise HDD SATA 6GB/s 256MB Cache RPM 7200 - Only...
IN STOCK at EXTERNAL supplier
- HDD size: 3.5"
- HDD capacity: 16000 GB
- HDD speed: 7200 RPM
Vantec Dual M.2 SSD RAID PCIe X4 Host Card
IN STOCK at EXTERNAL supplier
- Support Dual M.2 (2242, 2260, or 2280) SSD for RAID or individual Function
- Uses Fast 2nd Gen ASMedia ASM1062R RAID Controller w/Hydratek Hardware RAID Engine
- Design to install without drivers, use ACHI drivers already built into the latest OS.
- Support PCIe x4 or better slot configuration (include x8 or x16)
- Support RAID 0, 1, SPAN or JBOD (individual)
- Support automatic, background and off-line RAID rebuild
- Support PCI Express V 3.0 Specs and is compatible with v2.0 / v1.0
- Support Serial ATA Rev 3.2, NCQ, and PMF capability
- RAID transparent to OS and do not use CPU resources
Vantec Dual Bay 2.5" SATA SSD/ HDD Removable Rack
IN STOCK at EXTERNAL supplier
- Supports Two 2.5" SATA Hard Drives / SSDs
- Fits In Any Standard 3.5" Drive Bay
- Hot-Pluggable
- Compatible With SATA I / II / III Hard Drives & SSDs
- Aluminum HDD Case For Maximum Heat Dissipation
- Ejection Latch for Easy Removal of Hard Drive
- Security Key Lock Design
Synology M.2 SSD Riser - M2D18 for NVMe M.2 SSD Used for Caching
IN STOCK at EXTERNAL supplier
- Host interface: PCIe
- Output interface: M.2
- Expansion card standard: PCI 2.0
- Product colour: Black
Synology SAT5210 | Enterprise 2.5” SATA SSD
IN STOCK at EXTERNAL supplier
- Stable High Performance
- Enterprise-Grade Endurance
- Robust Data Protection
- Built for Synology Systems
Synology HAT3300 | 3.5" Plus Series 6TB Hard Drives for Synology Systems
IN STOCK at EXTERNAL supplier
- Reliable Always-On Operation - Backed by 1 million hours MTBF and 180TB/year workload rating
- Tested for Maximum Reliability - Stringent validation and up to 300,000 hours of testing ensure reliability in Synology systems
- Seamless Firmware Updates - Firmware updates can be performed directly in Synology DSM
- Reliable Recording Technology - Conventional magnetic recording (CMR) technology offers consistent performance
Unitek USB3.2 Gen2 Type-C 10Gbps Aluminium-Alloy Enclosure for M.2 NVME and SATA SSD...
IN STOCK at EXTERNAL supplier
- Support for M.2 NVME & SATA SSD for M-Key and B+M-Key - sizes 2242/2260/2280
- Hollowed design for superior heat dissipation
- With UASP for speed acceleration and TRIM supported - helpful in boosting the efficiency of data transfer
- With Auto-Sleep Mode for energy-saving after 30 minutes idle
- Aluminium heat exchange and silicone thermal pad are provided for heat dissipation
Unitek USB3.0 to 2.5" Sata HDD/SSD Adapter Including Enclosure (Y-1039B)
IN STOCK at EXTERNAL supplier
- USB3.0 Super Speed: 5 Gbps
- USB3.0 Connectors: USB 3.0 type Micro B Female
- SATA HDD Connectors: 15P+7P Female
- Operating Temperature: 0-70°C
Unitek USB3.0 Type-C to SATA 2.5" HDD/SSD Enclosure
IN STOCK at EXTERNAL supplier
- With e-sports style design, it is a hard drive enclosure that tailor-made for gamers.
- Integrated the USB Type-C cable with enclosure, easy to use and connect.
- With user friendly tool-less design.
- With LED light indicates the working status.
- With USB3.0 SuperSpeed data transfer, transfer speed up to 5Gbps. Backward compatible with USB2.0/1.1.
- Support SATA III (6Gbps), SATA II (3Gbps) and SATA I (1.5Gbps).
- With UASP (USB Attached SCSI Protocol), accelerates the data transfer speed.
- Compatible with all 2.5”SATA HDD / SSD with any capacity.
- Support 9.5mm or below 2.5” SATA HDD / SSD with any capacity.
- With sleep mode function.
- Plug and play, no driver installation process needed.
Unitek USB3.0 to SATA 2.5" HDD/SSD Enclosure (Y-3036)
IN STOCK at EXTERNAL supplier
- With e-sports style design, it is a hard drive enclosure that tailor-made for gamers.
- Integrated the USB cable with enclosure, easy to use and connect.
- With user friendly tool-less design.
- With LED light indicates the working status.
Unitek S1103D USB3.2 to 2.5" SATA Hard Disk Drive or SSD Enclosure
IN STOCK at EXTERNAL supplier
- USB-C Female upstream,
- SATA Female downstream,
- 1 x USB-C to c Data cable (50cm),
- Fits most 7mm / 9.5mm 2.5" SATAI / II / III Hard Disk Drive & SSD,
- Transparent design
Unitek USB3.1 Type-C to SATA 2.5' HDD/SSD Enclosure (Y-3363)
IN STOCK at EXTERNAL supplier
- USB3.1 Type-C to SATA 2.5' HDD/SSD Enclosure
Unitek USB3.0 to 2.5" SATA Hard Drive Enclosure (S1103A)
IN STOCK at EXTERNAL supplier
- Tool less design.
- LED light design shows the states of the devices.
- USB3.0 with super speed transfer up to 5Gbps, and backward compatible with USB2.0.
- UASP (USB Attached SCSI Protocol) support for even faster performance. UASP requires UASP capable host system.
- Supports 2.5" SATA6G HDD / SSD.
- Supports SATA6G, SATA3G & SATA1.5G.
- With LED light to indicate the working status.
- Automatically turn into sleep mode after no action for 30 minutes.
- Plug and play, no driver required.
Unitek USB3.1 to SATA6G 2.5”/3.5” Hard Disk Enclosure (Y-3035)
IN STOCK at EXTERNAL supplier
- With e-sports style design, it is a hard drive enclosure that tailor-made for gamers
- With LED light indicates the working status
- Backward compatible with USB2.0/1.1
- With sleep mode function to save energy
- Plug and play, no driver installation process needed
Vantec 225S6 EZ Swap EVO - Black Dual - 2.5 inch Mobile HDD Rack
IN STOCK at EXTERNAL supplier
- Supports Two 2.5" SATA Hard Drives / SSDs
- Fits In Any Standard 3.5" Drive Bay
- Hot-Pluggable
- Compatible With SATA I / II / III Hard Drives & SSDs
- Aluminum HDD Case For Maximum Heat Dissipation
- Ejection Latch for Easy Removal of Hard Drive
- Security Key Lock Design
Vantec MRK103F EZ-Swap White/Beige- Aluminum for IDE HDD 40mm Rear Cooling Fan
IN STOCK at EXTERNAL supplier
- White/beige,
- Aluminum for IDE HDD 40mm rear cooling fan, keylock
- HDD access/power indicator
- Inner tray compatible with iCYDOCK MB452UK
Vantec EZ-Swap MRK-102FD IDE HDD Rack - Beige
IN STOCK at EXTERNAL supplier
- Compatible with 3.5" IDE/PATA Hard Drive
- Aluminum Casing
- HD Capacity up to 750GB
- Easy 3 Steps Key Lock
- 40mm Rear Cooling Fan
- Power / HDD Access Indicator
- LCD Temperature Display w/Alarm
Vantec MRK-515ST 2.5" (7-15mm) SATA HDD Tray
IN STOCK at EXTERNAL supplier
- Supports 2.5” SATA I/II/III Hard Drives or SSD (7mm ~ 15mm height)
- Tool-Free Hard Drive Installation
- Universal NexStar SE Removable Hard Drive Trays
- Hot-Pluggable
Vantec 2.5" ( 7-15mm ) SATA HDD Tray for MRK-425ST Drive Chassis
IN STOCK at EXTERNAL supplier
- 2.5" ( 7-15mm )
- SATA HDD Tray for MRK-425ST Drive Chassis
Vizo AVK-250bk - 2.5" HDD Anti-vibration / Protection Kit
IN STOCK at EXTERNAL supplier
- Ultra-light silica gel material absorbs vibration
- Unique bubble-shape design for inner layer provides extra protection
- Bottom vents for better hard drive cooling
- For 3.5" / 2.5" HDD
- Great for hard drive protection during external operations
- Ultra-light silica gel material absorbs vibration
- Unique bubble-shape design for inner layer provides extra protection
- Bottom vents for better hard drive cooling
- Practical and space-saving unit for your hard drive
- Stackable and portable
- Color options : white, black
- Easy to install
Vizo Voyager HCL-201 - 2 Fan HDD Cooler
IN STOCK at EXTERNAL supplier
- Dimensions: 115 x 102 x 21 mm
- DC Fan Dimensions: 50 x 50 x 10 ( 2pcs )
- Bearing Type: Sleeve Bearing
- Speed : 4000 RPM
- Noise Level: 23.19 dBA
- Max Air flow: 9.21(Min:7.54 )CFM
- Rated Voltage: DC 12 V
- Operating Voltage : DC 11 V ~ DC 13.2 V
- Starting Voltage : DC 11 V
- Rated Current: 00.13 (Max:0.14 ) A x 2
- Compatibility: 3.5" Bay
Vantec Iceberq HDD Cooler
IN STOCK at EXTERNAL supplier
- Aluminum Alloy Material 100% Heat Dissipation
- High Airflow
- Ultra Quite Fan
- Extended HDD’s Life – Make PC System Stable
- Easy Installation
- Stylish Design
Vantec Iceberq HDC-6015 Hard Drive Cooler
IN STOCK at EXTERNAL supplier
- Easy Installation To Any 3.5" Hard Drive
- Reduces Hard Drive Temperature
- Extends Hard Drive's Lifetime
- Attractive Blue LED Light
- Ultra Quiet Cooling Fan