HDD/SSD Accessories

There are 31 products.

Showing 1-30 of 31 item(s)

Hard Disk Cooler Fan Alluninium x 2 Fan

IN STOCK at EXTERNAL supplier

Price R71
  • Easily installed on the bottom of your computer's hard drive using screws
  • Fan dimensions: 50x50x10mm
  • Speed in revolutions: 5000 ± 10 (RPM)
  • Air flow: 30 CFM
  • Maximum noise level: = 25 dBA
  • Fan material: Plastic
  • Heatsink material: Laminated thin aluminium
  • Type of Bearing: Sleeve Bearing
  • Clamping Type: Screws
  • Connector Type: 4 pins
  • Voltage: 12 V

NGFF M.2 SSD to 2.5" SATA 3 Converter

IN STOCK AT OVERSEAS SUPPLIER - DISPATCHED/COLLECTION IN 14-20 DAYS

Price R161
  • Suitable for 3cm, 4.2cm, 6cm, 8cm M2 (NGFF) SSD length.
  • With great capacity smoothing capacitor and high power LDO controller chip.
  • Low power consumption.
  • No noise when operating.
  • 2-5 times faster reading speed than HDD.
  • Easy to install.
  • NOTE : "Does not work with (NVME) M.2 drives"

Vantec Dual Bay 2.5" SATA SSD/ HDD Removable Rack

IN STOCK at EXTERNAL supplier

Price R579
  • Supports Two 2.5" SATA Hard Drives / SSDs
  • Fits In Any Standard 3.5" Drive Bay
  • Hot-Pluggable
  • Compatible With SATA I / II / III Hard Drives & SSDs
  • Aluminum HDD Case For Maximum Heat Dissipation
  • Ejection Latch for Easy Removal of Hard Drive
  • Security Key Lock Design

Orico 5.25" to 2.5 and 3.5" Aluminum HDD Bracket

IN STOCK at EXTERNAL supplier

Price R72
  • Fits in a 5.25-inch drive bay, and allows the mounting of 1x 3.5- inch drive and 1x 2.5- inch drive
  • Four rubber washers and 16 mounting screws included
  • Compatible with any 2.5 or 3.5 inch IDE, SATA, or SAS hard drive and solid state disk

Vantec NexStar SX, USB 3.2 Gen 2x1 Type C M.2 NVMe/SATA SSD Dock

IN STOCK at EXTERNAL supplier

Price R579
  • Designed for both M.2 NVMe or M.2 SATA Module 
  • Quick M.2 Module Lock/Unlock and Easy size change for 80/60/42mm using Rubber Mount 
  • Can accommodate any heatsink mounted M.2 with width up to 26 mm wide
  • ON/OFF switch for an easy Hot-Swap without unplugging the cable
  • USB 3.2 Gen 2x1 10Gbps (Theoretical Speed) using Native Type C Technology 
  • Mounted Anti-slip Pad on Dock
  • Design for Ultra-Fast data storage and transfer
  • Support USB Attached SCSI Protocol (UASP) function

Vantec 4 Channel, 2 MSATA + 2 SATA 6Gb/S PCIe RAID Card With HyperDuo

IN STOCK at EXTERNAL supplier

Price R869
  • Two 7Pin SATA connectors and two mSATA (mini PCIe) socket on board
  • Mounts two mSATA SSDs and two SATA HDDs/SSDs in PCIe slot
  • Compliant with PCI-Express Specification v2.0 and backward compatible with PCI-Express 1.x
  • Compliant with Serial ATA Specification 3.0
  • PCI Express x2 interface, and compatible with PCI Express x4, x8 and x16 slots
  • Supports communication speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
  • HyperDuo technology to maximum SSD performance
  • Support TRIM to extend SSD durability
  • Hot Plug and Hot Swap on SATA connection
  • Supports Port Multiplier FIS/CBS and Native Command Queuing (NCQ)
  • Support ATA and ATAPI commands
  • Compatible with SATA III/II/I Hard Drives
  • Support RAID function: RAID 0, RAID 1, RAID 10 and HyperDuo

ISTAR HDD Trayless Hot-swap Rack - BPN-DE230HD-SILVER

IN STOCK AT OVERSEAS SUPPLIER - DISPATCHED/COLLECTION IN 14-20 DAYS

Price R2,401
  • Aluminum Frame, designed for heavy-duty purpose
  • Support SAS I/II/III and SATA I/II/III Hard Drives
  • High Performance Transfer Rate up to 12Gb/s
  • Integrative shaping aluminum design for quickest heat sink
  • Aluminum front bezel with metal key lock mechanism for double safety

Orico 9.5 and 12.5mm Optical to 2.5 Caddy

IN STOCK at EXTERNAL supplier

Price R211
  • Take out your DVD Rom and expand your laptop’s storage
  • Utilise high speed SATA III 6Gbps connectivity
  • Works with HDDs and SSDs
  • Easy to install with its included screwdriver
  • Widely compatible with multiple laptop brands and models