Stand-Alone Inverters

Pure sine wave inverter
Built-in PWM solar charge controller
Configurable input voltage range for home appliances and personal computers via LCD setting
1200W PWM Solar Controller
24V Battery Input

24 Month carry in warranty

• To download the Inverter Manual Click Here

RCT AXPERT 5K MK2 5000VA/5000W INVERTER 48V DC WITH 4500W 450VDC MPPT CHARGER AND PARALLEL KIT.

• Dual MPPT design 
• Compatible with most Lithium-ion batteries and Lead Acid batteries
• Mobile App for monitoring
• IP65 rated
• Automatic switching from Grid-Tied to Off-Grid mode
• Zero export function
• Up to 16 units with the same firmware can be paralleled
• Essential and Non-Essential Loads outputs
• Comes with the Wi-Fi logger and CT
• Compatible with SolarMan App for Monitoring

• Pure sine wave MPPT Solar Inverter
• Customizable status LED ring with RGB lights
• Button with large 4.3" colour LCD
• Wide DC input range
• Supports USB On-the-Go function
• Data log events stored in the inverter
• Built-in Wi-Fi for mobile monitoring (Android/iOS App available)
• Reserved communication port for BMS
• Battery-independent function
• Parallel operation with up to 9 units
• Rated power 5600VA/5600W
• Voltage 230 VAC

• 5.0KVA Pure Sine Wave 48VDC Hybrid Inverter
• Continuous: 5kW / 5 kVA Max Watt Output
• High Voltage Built-In 100A MPPT Solar Charge Controller
• Voltage: 230V AC and Battery Voltage: 48VDC
• PV Maximum input current: 20A
• MPPT Voltage range: 120 to 430 VDC
• Can Be Set: Solar First, Grid First, Solar & Grid, Solar Only
• Solar Only: 100A (Maximum)
• Grid Only: Up To 80A
• Combination Solar and Grid: Up To 140A
• Peak Efficiency: 93%
• Overload And Short Circuit Protection
• Programmable Supply Priority For PV ,Battery Or Grid
• CAN & RS485 Port For BMS Communication
• Communication with LiFePO4 Batteries Via RS485 Port.

• AC Voltage Regulation(Batt mode): 230 VAC ± 5%
• Surge Power: 22000 VA
• Efficiency (peak): 93%
• Waveform: Pure Sine Wave
• No Load Power Consumption: < 70W
• DC Voltage: 12 VDC ± 5%, 100W
• Floating Voltage: 54 VDC
• Battery Voltage: 48 VDC
• Overcharge Protection: 63 VDC

• Pure sine wave output
• Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
• Built-in MPPT solar charge controller
• MAX PV Array Open Circuit Voltage: 450V
• Can provide the power to the load without battery
• Combining solar system, AC utility, and battery power source to supply continuous power
• Overload, short circuit and Deep discharge protection
• Cold start function
• Support USB, RS485 monitoring function
• WIFI remote monitoring (optional) - https://www.geewiz.co.za/ups-accessories/194637-wifi-dongle-for-must-inverters-with-usb-port-new-app-version.html

Note:

1) Fan comes on during charging, load shedding and periodically during normal operation

2) If installing in a DB board, please make sure to add a separate Earth & Neutral to the inverter output circuit to mitigate chances of surges

3) This inverter is not able to parallel connect with another 5Kva inverter

• Geewiz PURE SINE WAVE Inverter
• 1000VA
• 600W
• Selectable charge rate, 10A/15A
• LCD Screen
• Intelligent FAN - fan comes on only when charging and on high load. Once daily once fully charged
• Please note that fan is loud when it operates
• Lithium Compatible

• Uses high voltage IP65 batteries EC2800
• IP65-rated solution – suitable for outdoor installations
• Remote monitoring via web portal or smartphone with included Wi-Fi dongle
• Natural cooling – ensure quiet operation
• Quad MPPT – optimal solar production
• Built-in Type II AC & DC surge protection