Vantec NexStar JX Series- USB 3.2 Gen2x1 (10Gbps)- USB C- 2.5" SATA Drive Enclosure For...
IN STOCK at EXTERNAL supplier
- Compact enclosure designed for 2.5” SATA III SSD or HDD
- USB 3.2 Gen2x1 speed with native USB C
- Tool less for easy access, and mount
- Support latest Windows 10/11, Mac OS X, and Linux OS
- Support UASP, TRIM, and SMART
- Fit 7mm to 9.5mm thickness drives
- USB C cable to USB C or A with provided adapter
- Sleep when your system sleeps
Vantec ICEBERG Q M.2 NVME 2280 SSD Heat Sink - Black
IN STOCK at EXTERNAL supplier
- Maximum Heat Dissipation using High Vented Fins Heat Sink
- Fit Standard Single or Double Sided Size M.2 2280 NVMe/SSD
- Uses Aluminum Alloy with Dual Thermal pad with Heat Dissipating Properties
- Maximum Cooling for NVMe/SSD Module on Both Sides
- Dual Function Thermal Pads to Dampen Vibration and Contact on both sides
- Thumb Screws for easy & secure mounting to last and will not break down.
- Flat Based Contact for Maximum Heat Dissipation on whole module
- Available in Black, Red or Blue Color Heat Sink
Vantec 4 Channel 2 MSATA + 2 SATA 6Gb/S PCIe RAID Card With HyperDuo
IN STOCK at EXTERNAL supplier
- Two 7Pin SATA connectors and two mSATA (mini PCIe) socket on board
- Mounts two mSATA SSDs and two SATA HDDs/SSDs in PCIe slot
- Compliant with PCI-Express Specification v2.0 and backward compatible with PCI-Express 1.x
- Compliant with Serial ATA Specification 3.0
- PCI Express x2 interface, and compatible with PCI Express x4, x8 and x16 slots
- Supports communication speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
- HyperDuo technology to maximum SSD performance
- Support TRIM to extend SSD durability
- Hot Plug and Hot Swap on SATA connection
- Supports Port Multiplier FIS/CBS and Native Command Queuing (NCQ)
- Support ATA and ATAPI commands
- Compatible with SATA III/II/I Hard Drives
- Support RAID function: RAID 0, RAID 1, RAID 10 and HyperDuo
Vantec Dual M.2 SSD RAID PCIe X4 Host Card
IN STOCK at EXTERNAL supplier
- Support Dual M.2 (2242, 2260, or 2280) SSD for RAID or individual Function
- Uses Fast 2nd Gen ASMedia ASM1062R RAID Controller w/Hydratek Hardware RAID Engine
- Design to install without drivers, use ACHI drivers already built into the latest OS.
- Support PCIe x4 or better slot configuration (include x8 or x16)
- Support RAID 0, 1, SPAN or JBOD (individual)
- Support automatic, background and off-line RAID rebuild
- Support PCI Express V 3.0 Specs and is compatible with v2.0 / v1.0
- Support Serial ATA Rev 3.2, NCQ, and PMF capability
- RAID transparent to OS and do not use CPU resources
Vantec Dual Bay 2.5" SATA SSD/ HDD Removable Rack
IN STOCK at EXTERNAL supplier
- Supports Two 2.5" SATA Hard Drives / SSDs
- Fits In Any Standard 3.5" Drive Bay
- Hot-Pluggable
- Compatible With SATA I / II / III Hard Drives & SSDs
- Aluminum HDD Case For Maximum Heat Dissipation
- Ejection Latch for Easy Removal of Hard Drive
- Security Key Lock Design
Vantec NST-536S3-BK 5.25 inch External Drive Enclosure
IN STOCK at EXTERNAL supplier
- - Design for 5.25" Blu-Ray/DVD/CD drive
- - Super Speed USB 3.0 transfer rate
- - Plug and Play: add your optical drive to the case, no drivers to needed
- - Hot swappable for system equipped with USB port
- - Power switch on enclosure for easy on/off
Unitek USB4.0 Type-C and Thunderbolt 3 PCIe/NVMe M.2 SSD 2280 Aluminium-Alloy Enclosure...
IN STOCK at EXTERNAL supplier
- Designed for M.2 NVMe SSD supporting M-Key and B+M-Key - size 2280mm
- Hollowed design for superior heat dissipation
- With UASP for speed acceleration and TRIM supported - helpful in boosting the efficiency of data transfer
- Aluminium heat exchange and silicone thermal pad are provided for heat dissipation
Unitek USB3.2 Gen2 Type-C 10Gbps Aluminium-Alloy Enclosure for M.2 NVME and SATA SSD...
IN STOCK at EXTERNAL supplier
- Support for M.2 NVME & SATA SSD for M-Key and B+M-Key - sizes 2242/2260/2280
- Hollowed design for superior heat dissipation
- With UASP for speed acceleration and TRIM supported - helpful in boosting the efficiency of data transfer
- With Auto-Sleep Mode for energy-saving after 30 minutes idle
- Aluminium heat exchange and silicone thermal pad are provided for heat dissipation
Unitek USB3.0 to 2.5" Sata HDD/SSD Adapter Including Enclosure (Y-1039B)
IN STOCK at EXTERNAL supplier
- USB3.0 Super Speed: 5 Gbps
- USB3.0 Connectors: USB 3.0 type Micro B Female
- SATA HDD Connectors: 15P+7P Female
- Operating Temperature: 0-70°C
Unitek USB3.0 Type-C to SATA 2.5" HDD/SSD Enclosure
IN STOCK at EXTERNAL supplier
- With e-sports style design, it is a hard drive enclosure that tailor-made for gamers.
- Integrated the USB Type-C cable with enclosure, easy to use and connect.
- With user friendly tool-less design.
- With LED light indicates the working status.
- With USB3.0 SuperSpeed data transfer, transfer speed up to 5Gbps. Backward compatible with USB2.0/1.1.
- Support SATA III (6Gbps), SATA II (3Gbps) and SATA I (1.5Gbps).
- With UASP (USB Attached SCSI Protocol), accelerates the data transfer speed.
- Compatible with all 2.5”SATA HDD / SSD with any capacity.
- Support 9.5mm or below 2.5” SATA HDD / SSD with any capacity.
- With sleep mode function.
- Plug and play, no driver installation process needed.
Unitek USB3.0 to SATA 2.5" HDD/SSD Enclosure (Y-3036)
IN STOCK at EXTERNAL supplier
- With e-sports style design, it is a hard drive enclosure that tailor-made for gamers.
- Integrated the USB cable with enclosure, easy to use and connect.
- With user friendly tool-less design.
- With LED light indicates the working status.
Unitek S1103D USB3.2 to 2.5" SATA Hard Disk Drive or SSD Enclosure
IN STOCK at EXTERNAL supplier
- USB-C Female upstream,
- SATA Female downstream,
- 1 x USB-C to c Data cable (50cm),
- Fits most 7mm / 9.5mm 2.5" SATAI / II / III Hard Disk Drive & SSD,
- Transparent design
Unitek USB3.1 Type-C to SATA 2.5' HDD/SSD Enclosure (Y-3363)
IN STOCK at EXTERNAL supplier
- USB3.1 Type-C to SATA 2.5' HDD/SSD Enclosure
Unitek USB3.0 to 2.5" SATA Hard Drive Enclosure (S1103A)
IN STOCK at EXTERNAL supplier
- Tool less design.
- LED light design shows the states of the devices.
- USB3.0 with super speed transfer up to 5Gbps, and backward compatible with USB2.0.
- UASP (USB Attached SCSI Protocol) support for even faster performance. UASP requires UASP capable host system.
- Supports 2.5" SATA6G HDD / SSD.
- Supports SATA6G, SATA3G & SATA1.5G.
- With LED light to indicate the working status.
- Automatically turn into sleep mode after no action for 30 minutes.
- Plug and play, no driver required.
Unitek SolidForce USB-C to PCIe/NVMe M.2 SSD Dual Bay Enclosure With Office Clone
IN STOCK at EXTERNAL supplier
- Capable of PCIe Gen3x2 NVMe M.2 SSD. Compatible with both M-Key and M+B Key in 2242, 2260, and 2280 sizes.
- Dual bay can be functioning simultaneously, and also offline cloning the data from Disk A to Disk B.
- Support USB3.2 Gen2 SuperSpeed 10Gbps data transfer speed, with TRIM command and UASP acceleration function.
- Dual high-class chipset to optimize and maximize the M.2 SSD performance.
- Built-in slim-piece fan plus the high thermal-conductivity sleek aluminum housing for heat dissipation and long-lasting usage.
- With Secure-lock design, it helps prevent the unconsciously open of the enclosure.
- With LED indicator for the case status including on/off, stand-by, clone progress, disk-status.
- Tool-free design for quick and easy installation of the M.2 PCIe/NVMe SSDs.
- Attached are USB-C & USB-A data cables that fully support USB3.2 Gen2.
- Plug and play. No driver installation
Unitek USB3.1 to SATA6G 2.5”/3.5” Hard Disk Enclosure (Y-3035)
IN STOCK at EXTERNAL supplier
- With e-sports style design, it is a hard drive enclosure that tailor-made for gamers
- With LED light indicates the working status
- Backward compatible with USB2.0/1.1
- With sleep mode function to save energy
- Plug and play, no driver installation process needed
Vantec 225S6 EZ Swap EVO - Black Dual - 2.5 inch Mobile HDD Rack
IN STOCK at EXTERNAL supplier
- Supports Two 2.5" SATA Hard Drives / SSDs
- Fits In Any Standard 3.5" Drive Bay
- Hot-Pluggable
- Compatible With SATA I / II / III Hard Drives & SSDs
- Aluminum HDD Case For Maximum Heat Dissipation
- Ejection Latch for Easy Removal of Hard Drive
- Security Key Lock Design
Vantec MRK103F EZ-Swap White/Beige- Aluminum for IDE HDD 40mm Rear Cooling Fan
IN STOCK at EXTERNAL supplier
- White/beige,
- Aluminum for IDE HDD 40mm rear cooling fan, keylock
- HDD access/power indicator
- Inner tray compatible with iCYDOCK MB452UK
Vantec EZ-Swap MRK-102FD IDE HDD Rack - Beige
IN STOCK at EXTERNAL supplier
- Compatible with 3.5" IDE/PATA Hard Drive
- Aluminum Casing
- HD Capacity up to 750GB
- Easy 3 Steps Key Lock
- 40mm Rear Cooling Fan
- Power / HDD Access Indicator
- LCD Temperature Display w/Alarm
Vantec MRK-515ST 2.5" (7-15mm) SATA HDD Tray
IN STOCK at EXTERNAL supplier
- Supports 2.5” SATA I/II/III Hard Drives or SSD (7mm ~ 15mm height)
- Tool-Free Hard Drive Installation
- Universal NexStar SE Removable Hard Drive Trays
- Hot-Pluggable
Vantec 2.5" ( 7-15mm ) SATA HDD Tray for MRK-425ST Drive Chassis
IN STOCK at EXTERNAL supplier
- 2.5" ( 7-15mm )
- SATA HDD Tray for MRK-425ST Drive Chassis
Vantec Iceberq HDD Cooler
IN STOCK at EXTERNAL supplier
- Aluminum Alloy Material 100% Heat Dissipation
- High Airflow
- Ultra Quite Fan
- Extended HDD’s Life – Make PC System Stable
- Easy Installation
- Stylish Design
Vantec Iceberq HDC-6015 Hard Drive Cooler
IN STOCK at EXTERNAL supplier
- Easy Installation To Any 3.5" Hard Drive
- Reduces Hard Drive Temperature
- Extends Hard Drive's Lifetime
- Attractive Blue LED Light
- Ultra Quiet Cooling Fan
Vantec HCP-5252 Plastic HDD Cooler for 5.25" Bay
IN STOCK at EXTERNAL supplier
- Plastic cooler for 5.25" bay,
- 2x 3800rpm 60mm fan,
- 28 cfm - for 3.5" HDD in 5.25" bay
Vantec HCP-3502A Plastic Hard Drive Cooler 3.5"
IN STOCK at EXTERNAL supplier
- Plastic hard drive cooler 3.5"
- 2x 3800rpm 60mm fan
- 28 cfm - for 3.5" HDD in 3.5" bay
- Connector: 4 pin Molex
- Voltage: DC 12V
- Power consumption: 1.44W x2 W (2.88W total)
- Fan Speed: 3800rpm x2
- Airflow: 28 CFM
- Outline Dimension: 140 x 101.6 x 15.7mm
Vantec Nexstar2 525UF IDE 5.25 inch External Enclosure - White
IN STOCK at EXTERNAL supplier
- Supported hard disk drive interfaces: IDE/ATA,
- Hard drive size: 133.3 mm (5.25 ").
- Colour of product: Black, Silver,
- LED indicators: Power, Y,
- Material: Plastic.
- Data transfer rate: 0.48 Gbit/s.
- Device type: CD/DVD
Vantec NexStar Vault NST-V290S2 2.5-inch HDD Enclosure
IN STOCK at EXTERNAL supplier
- Protect your data from unwanted access
- Encryption Technology
- 6-Digit PIN
- Supports PC or Mac
- Hard Drive is Divided into "Public" and "Vault"
- Attractive Blue LED Indicates Power & HDD Activity
- Screw-free Design
- Protective Hard Case Included
- No Drivers Required
- USB 2.0
Unitek HDD-USB3-SSD-ENCL USB3.0 M.2 SSD Aluminium Enclosure
IN STOCK at EXTERNAL supplier
- Compact aluminium housing, compatible with a variety of sizes of B-Key or M+B Key M.2 SSD (30mm / 42mm / 60mm / 80mm).
- With USB3.0 Type-C interface, supports up to 5Gbps data transfer speed. It is a reversible plug connector, easy to plug in and out. Backward compatible with USB2.0/1.1.
- Support UASP and TRIM, maximise the data transfer speed and lifespan of SSD.
- With a LED light to indicate the working status.
- With the auto sleep mode function, it saves energy and maximizes the lifespan of the product.
- Plug and play, hot-swappable, no need to install the driver.
Vantec Standalone Hard Disk Duplicator
IN STOCK at EXTERNAL supplier
- Standalone Duplicator, design to use without connecting to a system
- Design to Duplicate Current High Capacity drives and serve as a Dual Bay Hard Drive Dock
- Simple One Button Duplication (OTD) for easy worry-free Cloning.
Unitek USB Type-C to M.2 NVME SATA Enclosure (S1230A)
IN STOCK at EXTERNAL supplier
- Dimensions: 107 × 32.4 × 13.1mm
- Material: Aluminium Alloy
- Colour: Space Grey