3D Pen PLA Filament (Mixed Colours) - 9M

IN STOCK AT OVERSEAS SUPPLIER - DISPATCHED/COLLECTION IN 14-20 DAYS

R26

Product diameter: 1.75mm
Length: 9 meters
Packing Contents: 1 x 9m 3D Printer Pen Filament

Bambu Lab PLA Matte Filament 1.75mm – 1kg Refill – Ultra-Smooth- Elegant Prints at High...

IN STOCK at GeeWiz

R455

Please Note: This is a Refill ONLY - Does NOT Include the Spool
Elegant Matte Finish – Achieve smooth, non-reflective prints with a premium look.
Fast Printing – Optimized for high-speed 3D printing up to 300 mm/s.
Easy to Use – Low warping, minimal stringing, and beginner-friendly.
Smart Compatibility – RFID tag enables auto-spooling and material detection on Bambu printers.
Eco-Conscious Choice – Refill only to reduce plastic waste.
Wide Application – Perfect for models, prototypes, and decorative projects.

Bambu Lab PLA Matte Filament 1.75mm - 1kg - with Bambu Reusable Spool - Various Colours

IN STOCK at GeeWiz

R525

Elegant Matte Finish – Achieve smooth, non-reflective prints with a premium look.
Fast Printing – Optimized for high-speed 3D printing up to 300 mm/s.
Easy to Use – Low warping, minimal stringing, and beginner-friendly.
Smart Compatibility – RFID tag enables auto-spooling and material detection on Bambu printers.
Eco-Conscious Choice – Refill includes the spool for ease of use.
Wide Application – Perfect for models, prototypes, and decorative projects.

Quick view

Bambu Lab PETG HF Filament 1.75mm – 1kg Refill – High-Speed- Matte-Finish with RFID for...

IN STOCK at GeeWiz

R675

Please Note: This is a Refill ONLY - Does NOT Include the Spool
Ultra-Fast Printing: Up to 2× speed of standard PETG
No-Hassle Printing: Minimizes oozing and clumping
Matte, Uniform Finish: Consistent texture regardless of print speed
Outdoor-Ready Strength: Great against sun, heat, water & impact
RFID Smart Filament: Auto-adjusts printer settings via AMS
Precision Grade: 1.75 mm ± 0.03 mm; dries for optimal quality
Note: PETG HF must be dried before use to achieve optimal print quality.

Bambu Lab A1 3D Printer with AMS Combo - Effortless Multi-Filament Printing

-R1,500

Quick view

Bambu Lab A1 3D Printer with AMS Combo - Effortless Multi-Filament Printing

Currently out of stock due to higher than expected demand, Backorder is Available to be DISPATCHED/COLLECTED IN 14-20 DAYS

R13,725 -R1,500

R12,225

Full-auto Calibration
Multi-Color Printing (Combo Version)
Active Flow Rate Compensation
1-Clip Quick Swap Nozzle
Active Motor Noise Cancelling
256*256*256 mm³ Build Volume
***PLEASE NOTE: Due to recent security policy changes by Bambu this printer will no longer be compatible with any 3rd party slicing software, Orca etc.

Quick view

Bambu Lab PETG-CF Filament 1.75mm - 1kg - with Bambu Reusable Spool

IN STOCK at GeeWiz

R810

PETG reinforced with carbon fiber for improved stiffness, durability, and heat resistance
High dimensional stability with reduced warping — ideal for functional, load-bearing parts
Matte, carbon-textured finish that hides layer lines and delivers a premium look
Excellent UV and weather resistance, suitable for outdoor applications
Great for brackets, jigs, enclosures, mounts, and semi-structural mechanical parts
Optimized for 0.4 mm hardened steel or high-temperature nozzles
Fully compatible with AMS / AMS Lite and comes on a reusable spool

SA Filament ABS Combo Pack - Premium Black / Premium Red Filament 1kg 1.75mm

-10%

Quick view

SA Filament ABS Combo Pack - Premium Black / Premium Red Filament 1kg 1.75mm

IN STOCK at GeeWiz

R1,030 -10%

R927

***PLEASE NOTE: ABS filaments are not suitable for use with the Bambu A1 and Bambu A1 mini as ABS requires an enclosed printer for temperature control.
For ABS recommend the Bambu P1S, X1
Pack includes ABS 2 rolls Premium Black / 2 rolls Premium Red Filament
Print Temperature: 230 – 250°C, dependent on printer model Heat Bed temperature: 80 – 110°C
Fan speed / Cooling: 0 - 100%
1Kg net weight - +- 400m per roll
1.5Kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: diameter 200mm, inner hub 58mm & Width 55mm
Vacuum bagged and packaged in cardboard box

Quick view

SA Filament TPU 95A Filament 500g - Grey

IN STOCK at EXTERNAL supplier

R295

TPU Filament for use with FDM 3D Printers
500g Spool

SA Filament Tri-Colour PLA+ Silk Filament Chrome Royale - Chrome Pink & Chrome Green & Chrome Blue - 750g | 1.75mm

New Arrival

Quick view

SA Filament Tri-Colour PLA+ Silk Filament Chrome Royale - Chrome Pink & Chrome...

IN STOCK at EXTERNAL supplier

R349

Chrome Royale - Chrome Pink & Chrome Green & Chrome Blue
Print Temperature: 200 – 230°C, dependent on printer model
Heat Bed temperature: 0 – 70°C
Fan speed / Cooling: 100%
750g net weight
1kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: diameter 200mm, inner hub 58mm & Width 55mm
Vacuum bagged and packaged in cardboard box

Quick view

Bambu Lab PLA Basic Filament 1.75mm - 1kg - with Bambu Reusable Spool - Various Colours

IN STOCK at GeeWiz

R525

Stand Out, Never Dull
Easy to Print & Beginner Friendly
Smooth Surface Finish
Biodegradable
Diameter: 1.75mm +/- 0.03mm
Size: 1kg
Available in Various Colours

Quick view

SA Filament Silk PLA Plus Chrome Silver Filament 1kg 1.75mm

IN STOCK at EXTERNAL supplier

R329

Print Temperature: 200 – 230°C, dependent on printer model
Heat Bed temperature: 0 – 70°C
Fan speed / Cooling: 100%
1kg net weight
1.5kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: diameter 200mm, inner hub 58mm & Width 55mm
Vacuum bagged and packaged in card board box

Quick view

Bambu Lab PLA Wood Filament 1.75mm - 1kg - with Bambu Reusable Spool

IN STOCK AT OVERSEAS SUPPLIER - DISPATCHED/COLLECTION IN 8-10 WEEKS

R615

Premium PLA + wood powder blend for a natural wood-like look and feel
Matte, grainy texture that hides layer lines and enhances realism
Prints emit a subtle wood aroma for an authentic crafting experience
Compatible with 0.4 / 0.6 / 0.8 mm nozzles (avoid 0.2 mm)
Easy to print, fast printing supported up to 250 mm/s
Works with AMS / AMS Lite and ships on a reusable spool
Ideal for decor, models, props, crafts, and wooden-style functional prints

Quick view

SA Filament PLA Trans Orange Filament 1kg 1.75mm

IN STOCK at GeeWiz

R329

Print Temperature: 200 – 230°C, dependent on printer model
Heat Bed temperature: 0 – 60°C
Fan speed / Cooling: 100%
1kg net weight - 340m per roll
1.5kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: Diameter 200mm, Inner Hub 58mm & Width 55mm
Vacuum bagged and packaged in cardboard box

Quick view

SA Filament PLA Light Grey Filament 1kg 1.75mm

IN STOCK at GeeWiz

R299

Print Temperature: 200 – 230°C, dependent on printer model Heat Bed temperature: 0 – 60°C Fan speed / Cooling: 100% 1Kg net weight - 340m per roll 1.5Kg Total shipping weight Accurate diameter of 1.75mm with a tolerance of ± 0.05mm Spool Size: diameter 200mm, inner hub 58mm & Width 55mm Vacuum bagged and packaged in cardboard box

Quick view

SA Filament PetG SPEED Sky Blue Filament 1kg 1.75mm

IN STOCK at GeeWiz

R299

Print Temperature: 235 – 255°C, dependent on printer model
Heat Bed temperature: 65 – 85°C
Fan speed / Cooling: 0 - 50%
1kg net weight - 340m per roll
1.5kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: diameter 200mm, inner hub 58mm & Width 55mm
Vacuum bagged and packaged in cardboard box

Quick view

SA Filament ABS Premium Natural/Ivory 1kg 1.75mm

IN STOCK at GeeWiz

R275

***PLEASE NOTE: ABS filaments are not suitable for use with the Bambu A1 and Bambu A1 mini as ABS requires an enclosed printer for temperature control.
For ABS we recommend the Bambu P1S, X1
Print Temperature: 230 – 250°C, dependent on printer model Heat Bed temperature: 80 – 110°C
Fan speed / Cooling: 0 - 100%
1Kg net weight - +- 400m per roll
1.5Kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: diameter 200mm, inner hub 58mm & Width 55mm
Vacuum bagged and packaged in cardboard box

Quick view

SA Filament ABS Premium Pink Filament 1kg 1.75mm

IN STOCK at GeeWiz

R225

***PLEASE NOTE: ABS filaments are not suitable for use with the Bambu A1 and Bambu A1 mini as ABS requires an enclosed printer for temperature control.
For ABS we recommend the Bambu P1S, X1
Print Temperature: 230 – 250°C, dependent on printer model Heat Bed temperature: 80 – 110°C
Fan speed / Cooling: 0 - 100%
1Kg net weight - +- 400m per roll
1.5Kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: diameter 200mm, inner hub 58mm & Width 55mm
Vacuum bagged and packaged in cardboard box

Quick view

SA Filament PLA Black Filament 1kg 1.75mm

IN STOCK at GeeWiz

R255

Print Temperature: 200 – 230°C, dependent on printer model
Heat Bed temperature: 0 – 60°C
Fan speed / Cooling: 100%
1kg net weight - 340m per roll
1.5kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: Diameter 200mm, Inner Hub 58mm & Width 55mm
Vacuum bagged and packaged in cardboard box

Quick view

SA Filament PLA Air Force Blue Filament 1kg 1.75mm

IN STOCK at GeeWiz

R329

Print Temperature: 200 – 230°C, dependent on printer model
Heat Bed temperature: 0 – 60°C
Fan speed / Cooling: 100%
1kg net weight
1.5kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: Diameter 200mm, Inner Hub 58mm & Width 55mm
Vacuum bagged and packaged in cardboard box

SA Filament PLA Combo Pack - Black / White / Grey / Dark Grey Filament 1kg 1.75mm

-10%

Quick view

SA Filament PLA Combo Pack - Black / White / Grey / Dark Grey Filament 1kg 1.75mm

IN STOCK at GeeWiz

R1,110 -10%

R999

Pack includes Black / White / Grey / Dark Grey PLA Filament
Print Temperature: 200 – 230°C, dependent on printer model
Heat Bed temperature: 0 – 60°C
Fan speed / Cooling: 100%
1Kg net weight - 340m per roll
1.5Kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: diameter 200mm, inner hub 58mm & Width 55mm
Vacuum bagged and packaged in cardboard box

Quick view

SA Filament TPU 95A Filament 500g - Magenta

IN STOCK at EXTERNAL supplier

R295

TPU Filament for use with FDM 3D Printers
500g Spool

SA Filament ABS Combo Pack - Premium Grey / Premium Natural Ivory / Premium Pink / Premium Green Filament 1kg 1.75mm

-10%

Quick view

SA Filament ABS Combo Pack - Premium Grey / Premium Natural Ivory / Premium Pink /...

IN STOCK at GeeWiz

R965 -10%

R869

***PLEASE NOTE: ABS filaments are not suitable for use with the Bambu A1 and Bambu A1 mini as ABS requires an enclosed printer for temperature control.
For ABS recommend the Bambu P1S, X1
Pack includes ABS Premium Grey / Premium Natural Ivory / Premium Pink / Premium Green Filament
Print Temperature: 230 – 250°C, dependent on printer model Heat Bed temperature: 80 – 110°C
Fan speed / Cooling: 0 - 100%
1Kg net weight - +- 400m per roll
1.5Kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: diameter 200mm, inner hub 58mm & Width 55mm
Vacuum bagged and packaged in cardboard box

Quick view

Creality Space Pi Filament Dryer

IN STOCK at EXTERNAL supplier

R1,325

Protects Against Moisture – Keeps filament dry to avoid nozzle clogs and weak prints
Consistent Performance – Enhances printing precision by stabilizing filament condition
User-Friendly Operation – Simple plug-and-play design for convenience
Universal Compatibility – Works with PLA, PETG, TPU, ABS, and more
Compact and Efficient – Space-saving size ideal for desktop 3D printing setups

Quick view

eSUN PLA-Lite - 1.75mm Filament - 1kg Spool

IN STOCK at GeeWiz

R265

Easy-to-print modified PLA – smooth surface, low warping, and minimal stringing
Great value filament – ideal for schools, hobbyists, and daily 3D printing projects
Strong, durable, and not easy to break – perfect for prototypes and models
Excellent flow and layer adhesion for clean, reliable prints
Eco-friendly and low-odor for safe indoor use
Compatible with most FDM/FFF 3D printers using 1.75 mm filament
Print temperature: 190–230 °C | Bed: 45–60 °C | Fan: 100%
Available in multiple colours – Black, Blue, Cold White, Fire Engine Red, Green, Grey, Orange, Very Peri, White, Yellow
Tensile strength: ~53 MPa | Flexural strength: ~90 MPa | Density: ~1.23 g/cm³
Ideal for decorative models, educational projects, prototypes, and everyday prints