MUST 5KW 5000VA PV1800 PV18 Parallel Expansion Card
IN STOCK at GeeWiz
- Allows up to 6x PV1800 inverters to be connected in parallel
- Increases power output and provides redundancy
- Easy to install
- Connects to inverters via a communication cable
Must PV1800 Pro Series High Frequency Off Grid Solar Inverter (5200VA / 5200W- 5.2KW) -...
IN STOCK at GeeWiz
- Pure sine wave output
- Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
- Built-in MPPT solar charge controller
- MAX PV Array Open Circuit Voltage: 450V
- Can provide the power to the load without battery
- Combining solar system, AC utility, and battery power source to supply continuous power
- Overload, short circuit and Deep discharge protection
- Cold start function
- Support USB, RS485 monitoring function
- WIFI remote monitoring (optional) - https://www.geewiz.co.za/ups-accessories/194637-wifi-dongle-for-must-inverters-with-usb-port-new-app-version.html
Note:
1) Fan comes on during charging, load shedding and periodically during normal operation
2) If installing in a DB board, please make sure to add a separate Earth & Neutral to the inverter output circuit to mitigate chances of surges
3) This inverter is not able to parallel connect with another 5Kva inverter
Sunsynk Sun 5K 5000W 5000KVA 5KW Hybrid PURE SINE WAVE Inverter 2x MPPT / includes WiFi...
IN STOCK at GeeWiz
-
Warranty is only valid when installed by a certified electrician and a CoC is issued
- Dual MPPT design
- Compatible with most Lithium-ion batteries and Lead Acid batteries
- Mobile App for monitoring
- IP65 rated
- Automatic switching from Grid-Tied to Off-Grid mode
- Zero export function
- Up to 16 units with the same firmware can be paralleled
- Essential and Non-Essential Loads outputs
- Comes with the Wi-Fi logger and CT
- Compatible with SolarMan App for Monitoring
- 5 Year Warranty
CTEK MXS3.8 Professional Battery Charger 12V 3.8A
IN STOCK at EXTERNAL supplier
- Charges batteries up to 85 Ah. Maintains larger batteries up to 130 Ah.
- Unique 7 step charging.
- Cold weather mode.
- Connect and Forget.
- Extends battery life.
CTEK MXS10 - 12V 10A Professional Battery Charger
IN STOCK at EXTERNAL supplier
- Easy to read LED display
- Comes with Connect – Eyelet and Connect – Clamp connectors
- Splash and dust proof (IP65)
- Safe spark free operation
- Reverse polarity protected
- Short circuit proof
CTEK MXS7.0 – 12V 7A Professional Battery Charger
IN STOCK at EXTERNAL supplier
- Maintains larger batteries up to 225Ah
- Easy to read LED display
- Comes with Connect – Eyelet and Connect – Clamp connectors
- Splash and dust proof (IP65)
- Safe spark free operation
- Reverse polarity protected
- Short circuit proof
CTEK MXS5.0 - 12V 5A Professional Battery Charger
IN STOCK at EXTERNAL supplier
- Fully automatic ‘connect and forget’ 8 step 12V charging
- Smaller battery, normal battery, AGM and Recond programs
- Built in automatic temperature compensation
- Patented float/pulse maintenance for batteries up to 160Ah
CTEK MXT14 - 24V 14A Charger
IN STOCK at EXTERNAL supplier
- Fully automatic ‘connect and forget’ 8 step charging
- Patented maintenance charging up to 500Ah
- Easy to read LED display
- Safe spark free operation
- Reverse polarity protected
- Short circuit proof
CTEK PRO25SE Battery Charger
IN STOCK at EXTERNAL supplier
- Integrated safety features, so it’s safe for the battery & the vehicle
- Built-in temperature sensor to achieve maximum charge levels
- Fully automatic and easy to use
- Simple to connect, spark proof and reverse-polarity protected
- Dedicated lead-acid reconditioning programme to restore battery life and recondition flat batteries
- IP44 classified for outdoor use
- Lightweight & highly portable
- Tough & robust
MXS7.0 Battery Charger Power Supply 12V 7A
IN STOCK at EXTERNAL supplier
- Supply mode allows the battery to be disconnected from the vehicle without losing important configurations.
- Charges batteries from 14 Ah up to 150 Ah. Maintains larger batteries up to 225 Ah.
- Supply program – can be used as a 12 V power source to protect electrical settings.
- Cold weather program, for charging in cold conditions and for AGM batteries.
- Recond program – special program to revive deeply discharged batteries.
- Splash resistant and dust-proof to IP65.
MXS5.0T Battery Charger 12V 5A
IN STOCK at EXTERNAL supplier
- Charges batteries up to 110 Ah. Maintains larger batteries up to 160 Ah.
- Unique 8 step charging.
- Temperature sensor.
- AGM program.
- 8 charging programs/program alternatives.
Philips 2 Port 10000mAh Power Bank
IN STOCK at EXTERNAL supplier
- 10,000 mAh
- USB A and Type-C charging port
- 3 USB charging ports
- Colour - Black
Philips 2 Port 20000mAh Power Bank
IN STOCK at EXTERNAL supplier
- 20,000 mAh
- Li polymer battery
- Dual USB
WIFI Dongle For ESENER / MUST / GEEWIZ Inverters with USB port *New APP Version*
IN STOCK AT OVERSEAS SUPPLIER - DISPATCHED/COLLECTION IN 14-20 DAYS
- The WIFI Pro 25 is our latest dongle for the PV18 Series inverters
- The WIFI PLUG25 dongle for MUST inverters can enable wireless communication between off-grid inverters and monitoring platform
- In addition, users have complete and remote monitoring and controlling experience for inverters when combining Wi-Fi module with WatchPower APP
- Available for both iOS and Android based device - *NEW APP VERSION*
- All data loggers and parameters are saved in iCloud
- Please Note - Only Compatible with MUST PV18 Series 3KVA and 5KVA inverters
Philips HeartStart FRx/HS1 Defibrillator Battery (M5070A)
IN STOCK AT OVERSEAS SUPPLIER - DISPATCHED/COLLECTION IN 8-10 WEEKS
- Lithium manganese dioxide battery
- Designed for use with the Philips HeartStart FRx and HS1 defibrillators
- Provides reliable and long-lasting performance
- Essential component of the defibrillator used to deliver life-saving shocks
- Four-year shelf life from date of manufacture
- Type - 9 Volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells.
- Capacity - Minimum 200 shocks or 4 hours of operating time.
- Standby life - Four years typical when the battery is installed by the install-by date.
SUNSYNK Wall Mount 15.97kWh Lithium Battery - 51.2Vdc (10 Year CELL Warranty + 5 year...
IN STOCK at EXTERNAL supplier
- Nominal Voltage: 51.2 Vdc
- Nominal Capacity: 312Ah
- Battery Energy: 15970 Wh
- Charge Voltage: 55.68 – 56.16VDC
- Discharge Voltage: 45.6 – 56.16VDC
- Nominal Charge/Discharge Current: 150A
- Nominal Charge/Discharge Power: 7500W
- Max Charge/Discharge Current: 300A
- Max Charge/Discharge Power: 15000W
- Short Circuit Current: 450A
Deye 3 Phase High Voltage Inverter - 20KW / 20000W / 22000VA
IN STOCK at EXTERNAL supplier
- 100% unbalanced output, each phase
- AC coupled to retrofit existing solar system
- *Max. 10 pcs parallel for on-grid and off-grid
- operation; Support multiple batteries parallel
- Max. charging/discharging current of 50A
- High voltage battery, higher efficiency
- 6 time periods for battery charging/discharging
- Support storing energy from diesel generator
Sunsynk Load Shedder Kit - All-in-one Power Lynk XL 5kw/5.12kwh (10 Year Warranty)
ON BACKORDER - DISPATCHED/COLLECTION IN 2-3 DAYS
- High-Grade Engineering: Engineered to the highest standard for optimal performance and reliability.
- Impressive Depth of Discharge: Capable of up to 80% depth of discharge, enhancing overall energy utilization.
- Scalability: Scalable up to 16 times, providing a maximum of 85.12kWh per inverter for flexible energy capacity.
- BMS Technology: Equipped with a Battery Management System (BMS) featuring a quick paralleling function.
- 1C Rating: 1C rated battery, allowing it to charge or discharge at the full 5.32kWh until depletion.
- Optimized Utilization: Enables end-users to fully utilize the potential of the inverter and battery systems.
Sunsynk Load Shedder Kit - All-in-one Power Lynk X 3.6kw / 3.8kwh (10 Year Warranty)
IN STOCK at EXTERNAL supplier
- In-built connection points for Load, Grid, CT, and Wi-Fi data logger ports
- Plug and play system for hassle-free installation
- Pre-set factory settings for convenience
- Supports LiFeP04 battery type
- Nominal battery voltage: 51.2V
- Battery input voltage range: 43.2-57.6V
- Max. charge voltage: 60V (configurable)
- Max. charge current: 60A (configurable)
- Max. discharge current: 80A (configurable)
- Battery capacity: 3840Wh
Sunsynk 16KW 16KVA 16000W - SINGLE Phase / 2 MPPT / Hybrid Inverter / includes WiFi...
EXPECTED TO BE IN STOCK AT LOCAL SUPPLIER - DISPATCHED/COLLECTION IN 2-3 DAYS
- Supporting Wi-Fi or GSM monitoring
- Visual power flow screen
- Parallel/Multi invert function grid-tied and off-grid
- Compatible with main electrical grid voltages or power generators
- Self-consumption and feed-in to the grid
- Auto restart while AC is recovering
- Auto earth bond feature (Via a relay)
- Fully programmable controller
- Programmable supply priority for battery or grid
- Programmable multiple operation modes: on-grid/off-grid & UPS
- 5 Year Warranty
Sunsynk 12KW 12KVA 12000W - Three Phase / 2 MPPT / Hybrid Inverter / includes WiFi...
EXPECTED TO BE IN STOCK AT LOCAL SUPPLIER - DISPATCHED/COLLECTION IN 2-3 DAYS
- 100% unbalanced output, each phase Max. output up to 50% rated power.
- 48V low voltage battery, transformer isolation design.
- 6 time periods for battery charging/discharging.
- Max. charging/discharging current of 240A.
- Frequency droop control.
- DC couple and AC couple to retrofit existing solar system.
- Support storing energy from diesel generator
- 5 Year Warranty
SUNSYNK Wall Mount 10.65kWh Lithium Battery - 51.2Vdc (10 Year CELL Warranty + 5 year...
IN STOCK at EXTERNAL supplier
- Nominal Voltage: 51.2 Vdc
- Nominal Capacity: 208Ah
- Battery Energy: 10650 Wh
- Charge Voltage: 55.68~56.16Vdc
- Discharge Voltage: 45.6-56.16 Vdc
- Nominal Charge/Discharge Current: 100A
- Nominal Charge/Discharge Power: 5000W
- Max Charge / Discharge Current: 100A
- Max Charge / Discharge Power: 10000W
- Short Circuit Current: 540A
SUNSYNK Wall Mount 5.32kWh Lithium Battery - 51.2Vdc (10 Year CELL Warranty + 5 year...
IN STOCK at EXTERNAL supplier
- Nominal Voltage: 51.2 Vdc
- Nominal Capacity: 104Ah
- Battery Energy: 5320 Wh
- Charge Voltage: 55.68~56.16Vdc
- Discharge Voltage: 45.6-56.16 Vdc
- Nominal Charge/Discharge Current: 50A
- Nominal Charge/Discharge Power: 2500W
- Max Charge / Discharge Current: 100A
- Max Charge / Discharge Power: 5000W
- Short Circuit Current: 350A
Sunsynk Sun 8K 8000W 8000KVA 8KW Hybrid PURE SINE WAVE Inverter 2x MPPT / includes WiFi...
IN STOCK at EXTERNAL supplier
-
Warranty is only valid when installed by a certified electrician and a CoC is issued
- 220V single phase, pure sine wave inverter
- Self-consumption & feed-in to the grid
- Auto re-start while AC is recovering
- Programmable supply priority for battery or grid
- Programmable multiple operation modes; on-grid / off-grid & UPS
- Configurable battery charging – current/voltage based on applications by LCD setting
- Configurable AC / solar / generator charger priority by LCD setting
- Compatible with mains voltage or generator power
- Overload / over-temperature / short-circuit protection
- Smart battery charger designer optimised battery protection
- Function installed to prevent excess power overflow to grid
- Supporting Wi-Fi monitoring and built-in 2 strings of MPP trackers
- Smart settable 3-stage MPPT charging for optimized battery performance
- Time of use function
- Smart load function