IN STOCK at EXTERNAL supplier

R211

Expands1-port Parallel LPT on system via USB connection.
Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
No IRQ, DMA, I/O address resource required.
Supports USB 1.1 full speed 12Mbps, and it is USB 2.0 compatible.
IEEE1284 Parallel(LPT) port supports SPP mode with transfer speed up to 2.7MB/sec.
Compact size and low power consumption.
Plug-n-Play, I/O address and IRQ assigned by BIOS.
Driver free under Microsoft Window 2000 / XP / 2003 / 2008 / Vista / 7.
Cable Length 1500 mm

IN STOCK at EXTERNAL supplier

R330

IN STOCK at EXTERNAL supplier

R462

Supports PCI Express Base Specification Revision 2.0.
Single-lane (x1) PCI Express throughput rates up to 5 Gbps.
Compliant with Universal Serial Bus 3.0 specification Revision 1.0.
Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.0
Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.
Supports USB data transfer rate of 1.5/12/480/5000 Mbps.
Expands four external USB3.0 Super-Speed ports on the system.
Each USB port supplies +5V / 900mA power output to USB device.
Hot-swapping feature allows to connect / disconnect devices without powering down the system.
Driver supports for Microsoft Windows XP, Vista, 7, 2008, 8 and 8.1 operation systems.
Certified by CE, FCC, RoHS, and Microsoft WHQL approval.

IN STOCK at EXTERNAL supplier

R409

Supports PCI Express Base Specification Revision 2.0.
Single-lane (x1) PCI Express throughput rates up to 5 Gbps.
Compliant with Universal Serial Bus 3.0 specification Revision 1.0.
Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.0.
Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.
Supports USB data transfer rate of 1.5/12/480/5000 Mbps.
Expands two external USB3.0 Super-Speed ports on the system.
Each USB port supplies maximum +5V / 900mA power output to USB device.
Low profile bracket design idea for slim or portable PC.
Hot-swapping feature allows connect/disconnecting devices without powering down the system.
Driver supports for Microsoft Windows XP, Vista,7, 2008, 8 and 8.1 operation system.
Certified by CE, FCC, RoHS, and Microsoft WQHL approval.

IN STOCK at EXTERNAL supplier

R793

IN STOCK at EXTERNAL supplier

R2,618

Expands 2 independent RS-232 serial ports over Ethernet networking.
Built-in with SUNIX DevicePortR DPL2000Q High-Performance Ethernet-UART controller.
SUNIX DevicePort proprietary Ethernet I/O Redirection Technology.
- Serial communication with real time data transmit and receive.
- Physical COM port accessible via Windows Device Manager.
- Up to 255 COM ports can be setup on a windows system simultaneously.

IN STOCK at EXTERNAL supplier

R3,570

Expands 8 independent RS-232 serial ports with communication speeds up to 921.6Kbps.
High speed SUN1999 16C950 compatible UART controller on-board.
Designed to meet PCI Express Base Specification Revision 1.1.
Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
On-chip hardware auto flow control to guarantee no data loss.

IN STOCK at EXTERNAL supplier

R925

Host interface: PCI,
Output interface: Serial,
Serial interface type: RS-232.
Purpose: PC, FIFO (First In, First Out): 128 B.
Windows operating systems supported: Windows 7 Home Premium,Windows 7 Home Premium x64,Windows 7 Professional,Windows 7 Professional...,
Server operating systems supported: Windows 2000 Advanced Server,Windows 2000 Server,Windows Server 2003,Windows Server 2003....
Transfer rate: 0.014 MB/s,
Connectivity technology: Wired,
Compatible operating systems: Linux 2.4.x / 2.6.x

IN STOCK at EXTERNAL supplier

R528

Expands 2 independent RS-232 serial ports with communication speeds up to 921.6Kbps
High-speed SUN1989 16C950 compatible UART controller on board
Compliance with PCI 33MHz Ver. 3.0/2.3/2.2./2.1 specification
Supports both 64-bit & 32-bit PCI bus slots and 3.3V & 5V power
Provides RS-232 serial ports with +5 or +12 VDC power output via COM 1st or 9th pin
On-chip hardware auto flow control to guarantee no data loss
Built-in ± 15KV ESD protection for all serial signals meets the IEC1000-4-2 standard
Plug-n-Play, I/O address, and IRQ assigned by BIOS
Low profile bracket design idea for slim or portable PC
Certified by CE, FCC, RoHS, and Microsoft WHQL approval
Support Microsoft Windows, Linux, and DOS

IN STOCK at EXTERNAL supplier

R446

Connect your standard VGA monitor or projector to a HDMI equipped computer.
Integrated chip to provide an active digital to analog conversion
Compliant with HDMI 1.4b specification.
VGA output is compliant with VESA VSIS version 1, Rev.2 specification.
Easy plug and play allows seamless display of your laptop and tablet content to your display